Description
VOOPOO PnP Pod 2: Takes Every PnP Coil, Including the RBA
The VOOPOO PnP Pod 2 – PnP Pod II on the box – is the empty pod for VOOPOO’s Drag H40, Drag H80S, Drag E60 and Drag H60, sold here as a single. VOOPOO says it is compatible with all PnP coils, including the PnP RBA, so you can run anything from a tight 1.2Ω MTL coil to a 0.15Ω mesh at 80W in the same pod.
That corrects a common mix-up: there is no separate “PnP 2” coil range. The original PnP coils fit this pod. Airflow is set by rotating the pod itself, and the drip tips are replaceable. Below: VOOPOO’s full coil table, what we’d fit, and how to set it up.
🔌 VOOPOO PnP Pod 2 (PnP Pod II)
✔ Single empty pod – coil sold separately
✔ Takes all PnP coils, including the RBA
✔ Stepless airflow: rotate the pod
✔ Solid magnetic connection
✔ Replaceable drip tips
✔ Side refill
PnP Coils for the PnP Pod 2
VOOPOO’s PnP Pod II page lists these coils with their wattage windows and nicotine guidance. VOOPOO suggests its TW (Dual-In-One) coils for this pod.
| Coil | Resistance | Wattage | Style |
|---|---|---|---|
| PnP-TW15 / TW20 / TW30 | 0.15Ω / 0.2Ω / 0.3Ω | 55–70W / 40–55W / 28–36W | DL, DL, RDL |
| PnP-VM6 | 0.15Ω | 60–80W | DL |
| PnP-VM5 | 0.2Ω | 40–60W | DL |
| PnP-VM1 | 0.3Ω | 32–40W | DL |
| PnP-VM3 | 0.45Ω | 25–35W | Half-DL |
| PnP-VM4 | 0.6Ω | 20–28W | Half-DL |
| PnP-TM1 | 0.6Ω | 20–25W | MTL |
| PnP-DW2 | 0.8Ω | 12–16W | MTL |
| PnP-TR1 | 1.2Ω | 10–15W | MTL |
| PnP-RBA | Build your own | – | MTL or half-DL |
Which Devices Does the PnP Pod 2 Fit?
VOOPOO lists the PnP Pod II for the Drag H40, Drag H80S, Drag E60 and Drag H60.
We stock the VOOPOO Drag H40 PnP 2 Vape Kit, and the PnP Pod II is its replacement pod – keep a spare so you can run an MTL coil in one and a DL coil in the other. VOOPOO also lists it for the VOOPOO Drag H80S, the VOOPOO Drag E60 and the Drag H60, so if you move up the Drag range your pods and coils come with you.
Will not fit: VOOPOO doesn’t list it for the Drag S, Drag X, Drag X Pro or Argus GT, so we can’t confirm it for those. PnP X coils are a different system and don’t fit.
How to Fit a Coil and Fill the PnP Pod 2
- Pull the pod off the magnetic base.
- Push your PnP coil straight into the pod – PnP coils are plug-and-play, with no threads.
- Open the side refill port, fill slowly and close it firmly.
- Refit the pod and rotate it to set the airflow.
- Let a new coil stand for a few minutes before firing, and start at the bottom of its wattage range. VOOPOO doesn’t publish a soak time; this is our advice.
How Long Does a Pod Last?
VOOPOO describes it as a long-life, economical pod without giving a figure. Because the coil is separate, the pod itself lasts for months – replace it if it cracks, leaks at the seams or stops seating on the magnets. Coil life depends on the coil: our DL customers on TW15 or VM6 change coils most often, while TR1 MTL users go longest.
PnP Pod 2 Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Leaking at the base | The coil isn’t pushed fully home. Pull it out and push it back in firmly. |
| Airflow won’t change | Rotate the whole pod; the gear coupling at the base turns the airflow. |
| Burnt hit on a new coil | Soak time was too short, or the wattage is above that coil’s window. |
| Gurgling on DL coils | Open the airflow further and use a higher-VG liquid. |
Best E-Liquids for These Pods
VOOPOO recommends 10mg or lower for this pod overall, and that’s right for the DL coils – use 3mg or 6mg freebase at 70/30 or similar. The MTL coils (TR1, TM1, DW2) are the ones to pair with nic salts at 10mg or 20mg, and 50/50 10ml e-liquids work well on the TR1. See nic salts vs freebase if you’re choosing between them.
Buy PnP Pod 2 Near You
Need PnP Pod 2 or PnP coils today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock VOOPOO pods, coils and kits, and the team can check which resistance suits your device and e-liquid. We can fit your first coil and set the airflow with you. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
- VOOPOO Drag H40 PnP 2 Vape Kit
- VOOPOO PnP TW Coils
- VOOPOO PnP TR1 Coils
- VOOPOO PnP VM1 Coils
- All VOOPOO Products
Frequently Asked Questions
Which PnP coils are compatible with VOOPOO pods?
It depends on the pod. The PnP Pod II on this page takes all PnP coils, including the RBA. The PnP MTL Pod only takes PnP coils of 0.3Ω and above, and PnP X cartridges need PnP X coils.
Do original PnP coils fit the PnP Pod 2?
Yes. There is no separate PnP 2 coil range – VOOPOO says the PnP Pod II takes all PnP coils.
Which PnP coil is best for flavour?
VOOPOO recommends its TW Dual-In-One coils for this pod. For a tight, flavour-focused MTL vape, we like the TR1 1.2Ω.
Is the PnP Pod 2 top fill?
No. VOOPOO describes it as side refilling.
Where can I find replacement pods for my VOOPOO vape?
Match the pod to your device: this PnP Pod II for the Drag H40, H80S, E60 and H60; the PnP X cartridges for the Drag S2 and X2. Our replacement pods page lists them all.
Does it come with a coil?
No. It’s a single empty pod.
Reviews
There are no reviews yet.