Vape Battery Chargers
Vape battery chargers from Nitecore, XTAR and Efest, with two or four bays for 18650, 20700 and 21700 cells. Charge your batteries outside the mod and keep a spare set ready to go.
Showing all 11 results
-
£26.95
-
£25.99
-
£13.99
-
£21.99
Showing all 11 results
Why Use a Dedicated Battery Charger?
If your mod takes removable vape batteries, an external charger lets you keep a charged set ready and swap them in as soon as the power runs low, so the mod isn’t out of use while it charges. Many also show you what’s happening to each cell, which a USB port on a mod generally won’t.
Two Bays or Four?
A two-bay charger suits most people with a single or dual-battery mod, and it’s small enough to keep on a bedside table or take away with you. Our two-bay options include:
- XTAR VC2 Battery Charger: micro-USB, 0.5A per bay, with an LCD showing voltage, current and capacity.
- XTAR X2 Battery Charger: selectable 0.5A to 2A fast charging, with an LCD display.
- Nitecore D2 DigiCharger: automatic detection and an LCD display, for 18650, 21700, AA, AAA and more.
- Efest LUSH BOX Dual 18650 Charger: charges at 2.1A for one cell or 1.0A each for two, and its lid doubles as a power bank.
Four bays make more sense if you run several devices or rotate through a lot of cells. The XTAR VC4 Battery Charger charges Li-ion and Ni-MH cells from 10440 to 32650 with automatic 0.1 to 1A charging, and the Nitecore i4 Intellicharger is a four-bay smart charger. Its two-bay sibling is the Nitecore i2 Intellicharger.
What to Check Before You Buy
- Battery size: check the charger takes your cell. An 18650-only charger won’t hold a 21700.
- Charge speed: a higher current fills a cell faster, while a lower one is gentler on it. Selectable or automatic charging gives you a choice or does the work for you.
- Display: an LCD lets you read voltage and progress per bay, which also helps you spot a tired cell.
- Power source: many chargers run from USB, so check you have a suitable adapter.
Charging Safely
Charge on a hard, non-flammable surface and stay within earshot rather than leaving cells charging overnight or while you’re out. Take cells out once they’re full, and stop using any battery with a damaged wrap. The charger’s manual will give the specific limits for your model.
See the full ranges from Nitecore, XTAR and Efest, or the Aspire page for the Breeze and the brand’s other kit.
Not a Removable-Battery Vaper?
Most vape pod kits have a built-in battery and charge directly by USB, so you won’t need one of these. The exception here is the Aspire Breeze Charging Dock, a dock made specifically for the Aspire Breeze. Ask at our Totton vape shop, Hythe vape shop and Holbury vape shop if you’re unsure what your device needs.
Frequently Asked Questions
Do I need a separate vape battery charger?
If your mod takes removable batteries, a dedicated charger lets you keep a charged set ready. Kits with a built-in battery charge by USB and don’t need one.
Can one charger handle both 18650 and 21700 batteries?
Many can, including the XTAR VC2, but some are 18650-only. Check the listing for the sizes each charger accepts.
Should I leave batteries charging overnight?
We’d advise against it. Charge on a hard, non-flammable surface, stay within earshot and remove the cells once they’re full.











