GTIN: 6941291505642 SKU: VOOPOOPODS Categories: , Tags: , , , , Brand:

Voopoo PnP MTL POD – singles

£6.99

VOOPOO PnP MTL Pod, single, coil not included. Designed for the PnP TR1 and TM2 and takes PnP coils of 0.3Ω and above – not the 0.2Ω or 0.15Ω. For the V.Suit, Drag X and Drag S.

In stock

Description

VOOPOO PnP MTL Pod: For PnP Coils of 0.3 Ohm and Above

The VOOPOO PnP MTL pod is the mouth-to-lung pod for the VOOPOO V.Suit, Drag X and Drag S, sold here as a single without a coil. VOOPOO built it around two coils, the PnP TR1 and the PnP TM2, and says it also takes any PnP coil of 0.3Ω and above.

That limit matters. It is not a full-range PnP pod: the 0.2Ω and 0.15Ω coils such as the VM5, VM6, TW20 and TW15 are excluded. Stay at 0.3Ω or higher and you have plenty of choice, from a tight 1.2Ω to a looser half-DL mesh.

VOOPOO PnP MTL Pod
The VOOPOO PnP MTL Pod. We sell it as a single, coil not included.

🔌 VOOPOO PnP MTL Pod

✔ Single pod, coil not included
✔ Designed for the PnP TR1 and TM2
✔ Takes PnP coils of 0.3Ω and above
✔ Not for 0.2Ω or 0.15Ω coils
✔ Replaceable coil system
✔ For the V.Suit, Drag X and Drag S

Which PnP Coils Fit the MTL Pod?

Every coil below is 0.3Ω or higher. Wattages are VOOPOO’s; VOOPOO doesn’t publish a wattage for the TM2.

Coil Resistance Wattage Draw
PnP-TR1 1.2Ω 10–15W MTL – our pick
PnP-R2 1.0Ω 10–15W MTL
PnP-TM2 0.8Ω Not published Made for this pod
PnP-TM1 0.6Ω 20–25W MTL
PnP-VM4 0.6Ω 20–28W Half-DL
PnP-VM3 0.45Ω 25–35W Half-DL
PnP-VM1 0.3Ω 32–40W The loosest this pod takes
White Vape Co recommends: fit the PnP TR1 1.2Ω at 10–15W. It’s one of the two coils VOOPOO designed this pod around, and it gives the tight, cigarette-style pull the pod is made for – ideal for 20mg nic salts. If you want a little more warmth, the PnP TM2 is the other made-for-this-pod coil.

Which Devices Does the PnP MTL Pod Fit?

VOOPOO says the PnP MTL Pod matches the VOOPOO V.Suit, Drag X and Drag S.

VOOPOO names three devices for this pod: the V.Suit, the Drag X and the Drag S. On the Drag X or Drag S it’s the tighter alternative to the standard PnP Pod, and it’s the pod to choose if you vape nic salts. Pair it with the PnP TR1 coil or PnP TM2 coil.

Will not fit: PnP coils below 0.3Ω – the VM5, VM6, TW20 and TW15 – and PnP X coils, which use a different system.

Fitting a Coil and Filling the PnP MTL Pod

  1. Take the pod off the device.
  2. Push a PnP coil of 0.3Ω or above into the pod. PnP coils push in and pull out, with no threads.
  3. Fill through the pod’s refill port, following your device’s manual – VOOPOO’s pod listing doesn’t describe it – and stop short of the top.
  4. Refit the pod on the device.
  5. Leave a fresh coil a few minutes to soak before the first puff, and start at the low end of its wattage.
VOOPOO PnP MTL Pod with the drip tip removed
The MTL pod with its drip tip removed.

How Long Does a Pod Last?

VOOPOO doesn’t publish a lifespan for this pod. Since the coil is the part that wears, one pod usually lasts for months; the coil is what you change. On the TR1 at MTL wattage, our customers typically see a week or more per coil. Replace the pod if it cracks or starts to leak from the body.

PnP MTL Pod Troubleshooting

Problem Likely cause and fix
Coil burns out quickly Check it’s 0.3Ω or higher and within its wattage. VM5, VM6, TW20 and TW15 don’t belong in this pod.
Draw too loose Switch to the TR1 or R2 for a tighter MTL pull.
Leaking Push the coil fully home and don’t overfill.
Weak flavour Raise the wattage a little within the coil’s range.

Best E-Liquids for These Pods

With the TR1 or R2, use nic salts at 10mg or 20mg, or 50/50 freebase from our 10ml e-liquids. On the looser VM3 or VM1, drop the strength. Read nic salts vs freebase for more on choosing.

Buy PnP MTL Pods Near You

Need PnP MTL pods today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock VOOPOO pods, coils and kits, and the team can check which resistance suits your device and e-liquid. Ask us which coils sit in its 0.3Ω-and-above range. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.

You May Also Like

Frequently Asked Questions

Does the PnP MTL Pod take all PnP coils?

No. VOOPOO says it takes the TR1, TM2 and other PnP coils of 0.3Ω and above. The 0.2Ω and 0.15Ω coils are out.

Which coil is best in the PnP MTL Pod?

The PnP TR1 1.2Ω for a tight MTL draw with nic salts.

What devices does it fit?

The VOOPOO V.Suit, Drag X and Drag S.

Does it come with a coil?

No. It’s a single pod; the coil is sold separately.

Which PnP coils are compatible with the VOOPOO MTL pod?

The PnP TR1 and TM2, plus any other PnP coil of 0.3Ω or above, such as the R2, VM4, VM3 and VM1.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.