SKU: Vaporesso Categories: , Brand:

Vaporesso Corex 2.0 Luxe-X Mesh Pod – 2 Pack

£9.99

Vaporesso LUXE X Series 0.6Ω mesh pods, two per pack, COREX 2.0 coil built in. Bottom-fill MTL pod rated at 21W; fits the LUXE X family and the LUXE XR Max and XR Max 2.

Description

Vaporesso LUXE X Replacement Pods: 0.6 Ohm COREX 2.0 Mesh

The Vaporesso LUXE X replacement pod is the LUXE X Series 0.6Ω mesh pod, two to a pack, with a non-replaceable COREX 2.0 coil. It’s the pod the LUXE X platform was built around: bottom filling, an MTL draw, and Vaporesso’s Morph Mesh with COREX cotton inside.

Vaporesso lists it for the whole LUXE X family, from the original LUXE X through the X2, X Pro and LUXE X3, plus the LUXE XR Max and XR Max 2. Below: wattage, fitment, filling and what to do when it gurgles.

Vaporesso LUXE X Series 0.6 ohm COREX 2.0 mesh pod, front view
LUXE X Series 0.6Ω mesh pod, smoked shell.

🔌 Vaporesso LUXE X Series 0.6 Ohm Mesh Pods

✔ Two pods per pack
✔ 0.6Ω COREX 2.0 mesh, built in
✔ MTL draw
✔ Bottom filling
✔ 21W on the LUXE X
✔ Fits the LUXE X family and LUXE XR Max

LUXE X 0.6 Ohm Pod Wattage

Vaporesso’s LUXE X spec lists the 0.6Ω mesh pod at 21W. It doesn’t publish a wider range, so treat 21W as the reference point and adjust to taste on a device that allows it.

Resistance Wattage Draw Best with
0.6Ω mesh (COREX 2.0) 21W MTL 10mg or 20mg nic salts, or 50/50 freebase
White Vape Co recommends: set it around 21W and pair it with 10mg or 20mg nic salts. Go lower if the flavour turns sharp, and don’t push it far past the spec – a hotter pod wears faster.
COREX mesh heating inside a Vaporesso LUXE X pod
COREX mesh heating inside a LUXE X pod.

Which Devices Do LUXE X Pods Fit?

Vaporesso’s LUXE X pod page lists the LUXE XR Max 2, LUXE XR Max, LUXE X3, LUXE X2 and the LUXE X Pro, and its store matrix confirms the 0.6Ω MTL pod for the LUXE X, X2 and X3.

The Vaporesso LUXE X3 Pod Vape Kit is the LUXE X device we sell, and Vaporesso’s X3 chart includes this bottom-filling 0.6Ω mesh pod alongside the Dual Mesh pods it ships with. The pod also fits the Vaporesso LUXE XR Max 2, which Vaporesso lists as compatible with LUXE X pods, as well as the LUXE X, LUXE X2, LUXE X Pro and LUXE XR Max.

Will not fit: XROS devices, or as a substitute for LUXE XR pods – Vaporesso treats those as separate platforms. It also isn’t a LUXE Q or ECO NANO pod.

The Vaporesso LUXE X pod family side by side
The LUXE X pod family: this is the 0.6Ω mesh version.

How to Fill a LUXE X Pod

  1. Take the pod out of the device.
  2. Turn it upside down and open the fill port on the base.
  3. Fill slowly, stopping short of the top so there’s an air gap.
  4. Close the port firmly and wipe the pod dry.
  5. Refit it. Vaporesso doesn’t give a priming time for this pod; we leave a new one about five minutes before the first puff.

How Long Does a Pod Last?

Vaporesso’s store says LUXE X pods give six to eight refills before the flavour degrades, or one to two weeks for a daily vaper, and credits COREX 2.0 with 30% longer pod life than the previous core. Dessert and very sweet flavours bring that down. Swap in a fresh pod once the taste goes muted.

LUXE X Pod Troubleshooting

Problem Likely cause and fix
Leak from the base The fill port isn’t fully closed. Press it home all the way round.
Gurgling Tap the pod into a tissue, then take slower draws.
Sharp or burnt taste Wattage too high, or the pod is spent. Drop to around 21W, or fit a new pod.
Pod not reading Clean the contacts and reseat the pod.

LUXE X 0.6 Mesh Pod vs LUXE X Dual Mesh Pod

This pod Dual Mesh
Coil Single COREX 2.0 mesh Dual-layer mesh
Resistances 0.6Ω 0.4Ω and 0.6Ω
Filling Bottom Top
Wattage published 21W Not published per pod
Confirmed devices LUXE X family, XR Max, XR Max 2 LUXE X3

The LUXE X3 ships with Dual Mesh pods. If you’d rather top-fill, see the Vaporesso LUXE X Dual Mesh pods.

Best E-Liquids for These Pods

An MTL mesh pod at 21W suits nic salts at 10mg or 20mg, and Vaporesso’s Dojoliq nic salts are made with its pods in mind. For freebase, a 50/50 from our 10ml e-liquids works. Avoid high-VG shortfills in a pod this size.

Buy LUXE X Pods Near You

Need LUXE X pods today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock Vaporesso pods, coils and kits, and the team can check which resistance suits your device and e-liquid. Not sure which LUXE you own? Bring it with you. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.

You May Also Like

Frequently Asked Questions

What pods are compatible with the Vaporesso LUXE X?

The LUXE X Series pods, including this 0.6Ω mesh pod. Vaporesso lists them across the LUXE X family and the LUXE XR Max and XR Max 2.

How long do Vaporesso LUXE X pods last?

Six to eight refills by Vaporesso’s figure, about one to two weeks for a daily vaper.

Is the coil replaceable?

No. The COREX 2.0 mesh is built in; replace the pod.

How many pods are in a pack?

Two.

Specifications

ohm

0.6ohms, 1.2ohms, 1.0ohms, 0.8ohms

Reviews are from customers who bought the product from us. Vape Club members receive loyalty points for leaving a review, whether it is positive or negative. We do not remove reviews for being negative.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.