SKU: Vaporesso Categories: , Brand:

Vaporesso Luxe-Q Replacement Pod – 4 Pack

£9.99

Vaporesso LUXE Q 0.6Ω mesh replacement pods, four per pack. Reversible for two airflow settings, clamshell top fill, fits the LUXE Q, QS, Q2, Q2 SE and Q3.

Description

Vaporesso LUXE Q Replacement Pods: 0.6 Ohm Mesh, Four per Pack

The Vaporesso LUXE Q replacement pod is a small clamshell-fill mesh pod with one trick most pods don’t have: it’s reversible. Turn it round in the device and the airflow changes, so a single pod gives you a looser or a tighter draw. We stock the 0.6Ω mesh, four pods to a pack.

Vaporesso lists every LUXE Q pod for every LUXE Q device, from the original LUXE Q and QS to the LUXE Q2, Q2 SE and Q3. Below: what the 0.6Ω is for, the reversible airflow, filling and pod life.

Vaporesso LUXE Q 0.6 ohm mesh replacement pod, front view
LUXE Q 0.6Ω mesh pod with its orange base band.

🔌 Vaporesso LUXE Q 0.6 Ohm Mesh Pods

✔ Four pods per pack
✔ 0.6Ω COREX mesh, built in
✔ Reversible pod: flip it to change the airflow
✔ Clamshell top fill, one hand
✔ SSS leak resistance
✔ Fits every LUXE Q device

Where the 0.6 Sits in the LUXE Q Range

Vaporesso makes LUXE Q pods in four resistances. It doesn’t publish a wattage for each – most LUXE Q devices set the power themselves – but it does describe the 0.6Ω as the pod for real RDTL vaping on the LUXE QS.

Resistance Draw Notes
0.6Ω mesh (this pod) Restricted lung (RDTL) The loosest LUXE Q pod – most vapour and flavour
0.8Ω mesh MTL A step tighter
1.0Ω mesh MTL Tight draw
1.2Ω Tight MTL The most cigarette-like
White Vape Co recommends: the 0.6Ω is for vapers who find a LUXE Q too tight. Pair it with 10mg nic salts for the smoothest restricted-lung vape; if you want 20mg salts, try it with the pod turned to the tighter airflow setting first.

Which Devices Do LUXE Q Pods Fit?

Vaporesso says the LUXE Q and LUXE QS take all four pods from 0.6Ω to 1.2Ω, and that the LUXE Q2, LUXE Q2 SE and LUXE Q3 are compatible with all LUXE Q pods.

Every LUXE Q device takes these pods, including the Vaporesso LUXE Q2 Pod Kit, which Vaporesso lists as compatible with all LUXE Q pods. The LUXE Q2 SE and LUXE Q3 are listed the same way, and the original LUXE Q and QS take all four resistances.

Will not fit: XROS, LUXE X or ECO NANO devices. Each Vaporesso range uses its own pod.

How to Fill a LUXE Q Pod

  1. Pull the pod out of the device.
  2. Flip open the clamshell cap on top – it’s designed for one hand.
  3. Fill slowly, stopping short of the top.
  4. Snap the cap shut and wipe off any drips.
  5. Choose your airflow by which way round you insert the pod, then leave a new pod a few minutes to soak before vaping (our advice; Vaporesso doesn’t give a time).
How to top-fill a Vaporesso LUXE Q pod in three steps
Open, fill, close: the clamshell top fill.

How Long Does a Pod Last?

Vaporesso says its COREX heating gives accurate flavour lasting 50% longer than its previous pods, though it doesn’t say what the baseline was. In our shops, a LUXE Q pod typically lasts around a week or a little more; the 0.6Ω works hardest of the four, so it’s usually the first to fade. Four in a pack covers most people for a month.

LUXE Q Pod Troubleshooting

Problem Likely cause and fix
Draw too loose Take the pod out and turn it round to the tighter airflow side.
Leaking from the top The clamshell cap isn’t snapped fully shut.
Weak vapour Turn the pod to the looser airflow side, and check the battery is charged.
Burnt taste Pod not soaked, or it’s reached the end of its life.

How the Reversible Airflow Works

Vaporesso designed the LUXE Q pod to sit in the device either way round, and the direction you choose changes how much air reaches the coil. One way gives a looser pull, the other a tighter one. Because it’s mechanical rather than a menu setting, it works the same in every LUXE Q device – try a few puffs each way and keep the one you prefer.

Reversible Vaporesso LUXE Q pod for loose or tight airflow
Insert the pod either way round to change the airflow.

Best E-Liquids for These Pods

With a 0.6Ω RDTL pod, 10mg nic salts are the sweet spot, and Vaporesso says the LUXE Q family caters to both nic salt and freebase – so a 50/50 from our 10ml e-liquids works too. Vaporesso’s Dojoliq nic salts are an easy starting point.

Buy LUXE Q Pods Near You

Need LUXE Q pods today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock Vaporesso pods, coils and kits, and the team can check which resistance suits your device and e-liquid. We’ll show you the reversible airflow in person. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.

You May Also Like

Frequently Asked Questions

Do LUXE Q pods fit the LUXE Q2 and Q3?

Yes. Vaporesso lists all LUXE Q pods for the Q2, Q2 SE and Q3.

How do I change the airflow on a LUXE Q?

Take the pod out and insert it the other way round.

Is the 0.6 LUXE Q pod MTL?

It’s the loosest of the four – Vaporesso calls it restricted lung on the LUXE QS.

How many pods are in a pack?

Four.

Specifications

ohm

0.6ohms, 1.2ohms, 1.0ohms, 0.8ohms

Reviews are from customers who bought the product from us. Vape Club members receive loyalty points for leaving a review, whether it is positive or negative. We do not remove reviews for being negative.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.