Description
OXVA NeXlim Pod Kit: 40W Dual Mesh With Boost and Eco
The OXVA NeXlim is where OXVA’s dual mesh pod range began: a 40W auto-draw pod kit with a 1500mAh battery, a 0.85-inch colour screen and two ways to vape. Boost fires both meshes together and Eco alternates between them; OXVA claims twice the flavour on Boost and twice the pod life on Eco. Three pod resistances across two modes gives what OXVA calls six vaping experiences.
The NeXlim is not an XLIM. It uses its own NeXlim pods, and XLIM pods are not interchangeable with it. Since launch OXVA has added the NeXlim GO, NeXlim 2 and NeXlim 2 Mini, and they all share pods with this one. Below: specs, which pod to run in each mode, set-up, fixes, colours and how the original compares with the NeXlim GO.
🔌 OXVA NeXlim at a Glance
✔ 1500mAh battery, 5V/2A Type-C
✔ 5–40W output
✔ Boost (both meshes) and Eco (alternating meshes)
✔ Auto-draw in 0.01s
✔ 0.85-inch colour screen, three themes
✔ Three airflow settings: MTL, MTL/RDL and RDL
✔ Ships with 0.6Ω and 0.8Ω NeXlim pods
OXVA NeXlim Specifications
OXVA’s published specifications, including its wattage window for each pod.
| Specification | NeXlim |
|---|---|
| Battery | 1500mAh, built in |
| Charging | Type-C, 5V/2A |
| Output | 5–40W, 0.2–3.0Ω |
| Modes | Boost and Eco |
| Firing | Auto-draw, 0.01s |
| Screen | 0.85-inch colour: mode, power, battery, puff record and pod resistance |
| Themes | Classic (no lights or animation), Robot (animations and breathing lights), Cyberpunk (marquee lights on every puff) |
| Airflow | Side control with three settings: MTL, MTL/RDL, RDL |
| Pod wattage | 0.6Ω: 20–40W; 0.8Ω: 12–32W; 1.2Ω: 10–25W |
| Body | Zinc alloy, PCTG and PC with PU or aluminium finishes; 122 x 28.5 x 17.5mm, 87.5g |
Which Pods Fit the OXVA NeXlim?
The NeXlim takes two versions of the NeXlim cartridge, both in 0.6Ω, 0.8Ω and 1.2Ω.
The pods it launched with are the OXVA NeXlim replacement pods, the like-for-like refill for the two in the box. OXVA’s newer NeXlim Unitech 3.0 replacement pods fit as well: the third-generation dual mesh, which primes in about 30 seconds and adds triple anti-leak protection. If you’re buying fresh, that’s the version we’d choose, because it also fits every newer NeXlim if you upgrade later.
Will not fit: XLIM pods of any kind, including V3, EZ, V2 and the stainless steel DNA pods.
Getting Started with the NeXlim
- Charge it over USB Type-C with the cable in the box.
- Pull out the pre-installed 0.6Ω pod, fill it, close the plug firmly and refit it.
- Let a new pod soak for a few minutes before your first draw.
- Choose Boost or Eco – the button operation card in the box shows how – and pick a screen theme.
- Set the airflow to MTL, MTL/RDL or RDL, then simply inhale. It fires in 0.01s.
NeXlim Battery and Pod Life
The 1500mAh battery charges at 5V/2A. How far a charge goes depends mostly on the mode: Eco alternates the two meshes, which is gentler on both the battery and the pod, while Boost fires both at once and can run a pod at up to 40W. The screen keeps a puff record alongside the battery level, so you soon learn your own pattern. If pods are wearing out in a few days, it is nearly always an 0.6Ω on Boost – move to the 0.8Ω.
NeXlim Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| 0.6 pod burning out fast | It’s being run on Boost. Use the 0.8Ω for Boost and keep the 0.6Ω for Eco. |
| Flavour feels thin | Probably a 1.2Ω in Eco. Try the 0.8Ω on Boost, or the 0.6Ω in Eco with nic salts. |
| Lights are distracting | Switch to the Classic theme, which has no lights or animation. |
| Leaking | The plug isn’t fully closed or the pod was filled to the brim. Close it firmly and leave an air gap. |
| An XLIM pod won’t fit | It won’t – XLIM and NeXlim pods are not interchangeable. Use NeXlim pods only. |
NeXlim vs NeXlim GO
| NeXlim | NeXlim GO | |
|---|---|---|
| Battery | 1500mAh | 1800mAh |
| Charging | 5V/2A | 5V/2A, full in 45 minutes |
| Output | 5–40W | 5–40W |
| Screen | 0.85-inch colour, 3 themes | None, tri-colour battery light |
| Mode change | Buttons | One slide switch |
| Firing | Auto-draw | Auto-draw |
| Pods in the box | 0.6Ω and 0.8Ω | One 0.8Ω |
Our NeXlim vs NeXlim GO comparison goes into more detail. The short version: screen, themes and a second pod on the NeXlim; a bigger battery and simpler controls on the GO.
NeXlim Colours
OXVA lists 18 NeXlim finishes: Chequered Pink, Chequered Gray, Chequered Green, Terrain Black, Traction Black, Traction Gray, Glory Red, Power Black, Pearl Pink, Rose Gold, Coral Orange, Black Gold, Dark Grey, Starry Blue, Dark Blue, Pine Green, Dark Brown and Black Warrior. The colour options above show which are in stock right now.
What’s in the Box
One NeXlim device, a NeXlim 0.6Ω pod (pre-installed), a NeXlim 0.8Ω pod, a Type-C cable, a user manual and button operation instructions.
Best E-Liquids for the NeXlim
NeXlim pods suit nic salts and 50/50 freebase. In Eco on the 0.6Ω, 20mg or 10mg salts give a full, rich hit; on Boost with the 0.8Ω, 10mg is plenty for most people because the extra vapour carries more nicotine per puff. OXVA Ox Passion nic salts are the obvious partner, and our freebase e-liquids cover smoother 3–6mg options.
Buy the NeXlim Near You
Need the OXVA NeXlim or NeXlim pods today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. Tell us whether you vape on Boost or Eco and we’ll match the pod. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
- OXVA NeXlim Unitech 3 Replacement Pods
- OXVA NeXlim Replacement Pods
- OXVA NeXlim 2 Pod Kit
- OXVA NeXlim GO Pod Kit
- NeXlim 2 and NeXlim 2 Mini Review
- All OXVA Vapes
Frequently Asked Questions
Which NeXlim pod should I use on Boost?
The 0.8Ω. The 0.6Ω burns out quickly on Boost – keep it for Eco with nic salts.
What are the NeXlim screen themes?
Classic, with no lights or animation; Robot, with animations and breathing lights; and Cyberpunk, with marquee lights on every puff.
Is the NeXlim auto-draw?
Yes, it fires in 0.01s when you inhale.
Does the NeXlim come with a charging cable?
Yes, a Type-C cable is in the box, along with two pods.
Is the OXVA NeXlim good?
It’s still one of the most flexible pod kits we sell: 40W, dual mesh, Boost and Eco and a colour screen. Newer models add battery and polish, but they use the same pods.
How do you use the NeXlim?
Fill a NeXlim pod, let it soak, choose Boost or Eco, set the airflow and inhale – it’s auto-draw. The full steps are above.
Which is better, the NeXlim or the XLIM Pro 2?
Different jobs. The NeXlim uses dual mesh pods, up to 40W and Boost/Eco for more flavour and vapour; an XLIM like the XLIM Pro 2 DNA is slimmer, lighter and has a wider choice of pods. The pods are not interchangeable.
What pods fit the OXVA NeXlim?
The original NeXlim pods and the NeXlim Unitech 3.0 pods, both in 0.6Ω, 0.8Ω and 1.2Ω. XLIM pods do not fit.
Reviews
There are no reviews yet.