Description
Lost Vape Ursa Cap Pod Kit: Anti-Dust Cap, 1000mAh and 25W
The Lost Vape Ursa Cap is a pocket-sized MTL pod kit with one idea that sets it apart: a removable anti-dust cap that covers the mouthpiece, tethered to the body by a metal chain so it can’t go missing. Underneath is a 1000mAh battery, 9–25W of power, adjustable airflow and the URSA Cartridge V2, Lost Vape’s upgraded pod, which the UK kit ships with in 0.8Ω.
At 92mm tall and about 50g it’s the size of a lipstick, and there’s nothing to learn: you draw to vape, and the only button is for airflow. Below: the specs, which pods fit, filling and priming, what the light means, troubleshooting, the eight colours and what’s in the box.
🔌 Lost Vape Ursa Cap at a Glance
✔ 1000mAh built-in battery
✔ Type-C charging
✔ 9–25W output
✔ Draw-activated, no fire button
✔ Adjustable airflow
✔ Anti-dust cap on a chain
✔ Side LED battery indicator
✔ URSA Cartridge V2 pods, 2ml
Lost Vape Ursa Cap Specifications
From Lost Vape’s own user manual:
| Specification | Ursa Cap |
|---|---|
| Battery | 1000mAh built-in (3.3–4.2V) |
| Charging | Type-C, 5V/1A; the cable supports a 5V/2A charger |
| Output | 9–25W |
| Firing | Draw-activated |
| Airflow | Airflow control button |
| Pod | URSA Cartridge V2, 2ml, side refilling plug |
| Pod in the box | URSA Cartridge V2 0.8Ω |
| Body | Plastic, with anti-dust cap and chain |
| Size and weight | 18.4 x 31.4 x 92.0mm, 50.5g |
Which Pods Fit the Ursa Cap?
Lost Vape lists the Ursa Cap as URSA Cartridge V2 compatible.
Replacement pods are the Lost Vape URSA Cartridge V2 pods, the same V2 pod used across Lost Vape’s Ursa Nano and Ursa Baby Pro kits. Lost Vape rates the V2 at 10-plus refills, with a double leak-resistant base and a curved mouthpiece; the 0.8Ω suits nic salts and the 0.6Ω suits freebase.
Filling and Priming the Ursa Cap
- Slide the dust cap off and pull the pod out of the device.
- Open the e-liquid refilling plug on the side of the pod.
- Refill through the filling slot, then seal the plug firmly.
- Put the pod back. With a new pod, leave it at least five minutes before vaping – Lost Vape’s own priming advice, so the cotton is soaked.
- Set the airflow with the airflow control button and draw to vape. Refit the cap before it goes back in your pocket.
Ursa Cap Battery Life and the LED
The 1000mAh battery charges over Type-C; Lost Vape’s own testing puts a near-empty-to-full charge at about 40–60 minutes on a 5V/2A charger, and says low-power MTL use lasts several days per charge. The LED on the right-hand side tells you where you are: red means the battery is low (below 3.7V), blue means mid-charge (3.7–3.9V), green means well charged, and it stays solid green when fully charged.
Ursa Cap Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| No vapour when I draw | Check the pod is pushed fully home and the LED isn’t red – if it is, charge it. |
| Burnt first puff | The pod wasn’t primed. Wait at least five minutes after filling a new pod. |
| Leaking | The refilling plug isn’t sealed. Press it fully closed after filling. |
| Draw too airy | Close the airflow with the airflow control button. |
| Cap keeps coming off the chain | Clip the chain’s clasp through the chain hole on the body. |
Why the Dust Cap Matters
A pod’s mouthpiece picks up pocket fluff, crumbs and bag dust, and that ends up in your mouth. The Ursa Cap’s cap covers the whole mouthpiece, so it’s clean every time you take it out, and the chain keeps the cap attached while you vape. Lost Vape describes the design as ideal for everyday pocket and bag storage, and the compact, lipstick-like shape keeps it discreet.
Ursa Cap Colours
Lost Vape makes the Ursa Cap in eight finishes: Joy Purple, Joy Blue, Solo Charm, Pink Carnival, Galaxy Star, Pearl White, Infinity Black and Mint Green. The colour options above show which are in stock.
What’s in the Box
One Ursa Cap device, an URSA Cartridge V2 0.8Ω (2ml), a dust cap chain, a Type-C cable, a user manual and a warranty card.
Best E-Liquids for the Ursa Cap
The Ursa Cap is a mouth-to-lung pod, so nic salts at 10mg or 20mg are the natural choice on the 0.8Ω. On a 0.6Ω V2 pod, 50/50 freebase 10ml e-liquids work well too. Not sure which? Read nic salts vs freebase.
Buy the Ursa Cap Near You
Need the Lost Vape Ursa Cap today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. See the colours in person and we’ll fill and prime your first pod. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
- Lost Vape URSA Cartridge V2 Replacement Pods
- Lost Vape Ursa Pocket Kit
- All Lost Vape Kits
- Nic Salt E-Liquids
Frequently Asked Questions
What pods does the Lost Vape Ursa Cap use?
The URSA Cartridge V2, in 0.6Ω or 0.8Ω.
Is the Ursa Cap draw-activated?
Yes. The only button is for airflow; you just inhale to vape.
How long does the Ursa Cap take to charge?
Lost Vape’s testing says about 40–60 minutes from near empty on a 5V/2A charger.
What do the Ursa Cap lights mean?
Red is low, blue is mid-charge, green is well charged; solid green means full.
Is the Ursa Cap good for beginners?
Yes – draw-activated, one airflow button, and a cap that keeps the mouthpiece clean.
How big is the Ursa Cap?
18.4 x 31.4 x 92.0mm and 50.5g.
What is the Ursa Cap made of?
According to Lost Vape’s manual, the body is plastic, with a metal chain for the dust cap.
Reviews
There are no reviews yet.