Description
Aspire PockeX AIO Vape Pen: 1500mAh, Top Fill, U-Tech Coils
The Aspire PockeX is an all-in-one vape pen: battery and 2ml tank in a single 117.7mm stainless steel tube, with one button and nothing else to learn. Five clicks switches it on or off, a 1500mAh battery sits inside, and the top cap unscrews for filling so the base stays dry. It’s a proven design that has been in vape shops for years.
Unlike a pod kit, the PockeX uses replaceable coils: Aspire’s U-Tech design in 0.6Ω stainless steel for more vapour, or 1.2Ω Kanthal for a tighter draw with higher-strength liquid. Below: specs, which coil to buy, filling and priming, the battery light, spare parts and FAQs.
🔌 Aspire PockeX at a Glance
✔ 1500mAh built-in battery
✔ Type-C charging
✔ One button: five clicks on or off
✔ Direct (bypass) output – no settings
✔ 2ml stainless steel and glass tank
✔ Top fill: unscrew the top cap
✔ Replaceable U-Tech coils: 0.6Ω and 1.2Ω
✔ Blue/red battery light
Aspire PockeX Specifications
Aspire’s figures for the PockeX and its two coils:
| Specification | PockeX |
|---|---|
| Battery | 1500mAh built-in |
| Charging | Type-C (early versions used micro USB) |
| Output | Bypass (direct battery output) |
| Firing | Button; five clicks on or off |
| Tank | 2ml, stainless steel with a Pyrex glass tube |
| Filling | Top fill under the screw-off cap |
| Coils | 0.6Ω 316L stainless, 18–20W; 1.2Ω Kanthal, 10–12W |
| Airflow | Top airflow, wider Delrin drip tip |
| Size and weight | 117.7 x 19.7mm, 86g |
Which Coils and Parts Fit the Aspire PockeX?
The PockeX takes Aspire’s PockeX U-Tech coils, and we stock the spare parts that most often need replacing.
Replacement heads are Aspire PockeX coils (5 pack). Aspire rates the 0.6Ω stainless coil at 18–20W and the 1.2Ω Kanthal at 10–12W; the PockeX’s bypass output drives either with no setting to change.
For accidents, we stock PockeX replacement glass with its metal sleeve and a PockeX replacement top. Starting from scratch? The Aspire PockeX AIO bundle deal puts the kit, a coil five-pack and e-liquid in one box.
Will not fit: Aspire lists the PockeX coil for the PockeX only, so we don’t recommend BVC, Nautilus X or other Aspire heads in it.
Filling and Priming the PockeX
- Charge over Type-C; the button light shows blue above 30% and red below.
- Unscrew the top cap and fill down the side of the tank, keeping liquid out of the centre tube.
- Screw the cap back on firmly.
- Let the coil soak before firing – Aspire says around 2–3 minutes, longer for thicker liquids. With a brand-new coil we give it five.
- Click the button five times to switch on, then press and hold it while you inhale.
PockeX Battery and Coil Life
The 1500mAh battery is large for a slim pen, and with bypass output there’s no wattage to push it harder, so a charge covers a full day for most of our customers. The light in the button is the only gauge: blue means more than 30% left, red means it’s time to charge. Coil life depends on your liquid and how much you vape; change the coil once the flavour dulls or it tastes burnt.
PockeX Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Burnt taste with a new coil | It wasn’t primed. Let every new coil soak before the first puff. |
| No vapour | Switch on with five clicks, charge if the light shows red, and check the coil is screwed in. |
| Gurgling | Liquid got into the centre tube. Remove the drip tip, blow gently through a tissue and fill down the side next time. |
| Cracked glass | The glass is replaceable – see the spare parts above. |
PockeX vs Endura T18 II
| Aspire PockeX | Innokin Endura T18 II | |
|---|---|---|
| Battery | 1500mAh | 1300mAh |
| Output | Bypass | 10.5, 12 or 13.5W |
| Coils | 0.6Ω and 1.2Ω U-Tech | 1.5Ω Prism |
| Charging | Type-C | Micro-USB |
Both are proven pen kits. The Innokin Endura T18 II is MTL-only with three heat settings, while the PockeX’s 0.6Ω coil opens up to a looser draw.
PockeX Colours
Aspire lists Stainless Steel, Pantone White, Matte Black, Blue, Pink, Rainbow and Black-White, plus Gold, Red, Pink and Grey gradients. The options above show what we have now.
Best E-Liquids for the PockeX
With the 1.2Ω coil, use 10–20mg nic salts or 50/50 freebase. With the 0.6Ω, lower strengths suit better – 3mg or 6mg freebase from our 10ml e-liquids. Our guide to nic salts vs freebase explains why the stronger salts belong on the higher-resistance coil.
Buy the PockeX Near You
Need the Aspire PockeX today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. We can fit and prime your first coil for you. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
- Aspire PockeX Coils 5 Pack
- Aspire PockeX AIO Bundle Deal
- PockeX Replacement Glass
- Innokin Endura T18 II Kit
- All Aspire Vapes
Frequently Asked Questions
How do you turn on the Aspire PockeX?
Click the button five times; five more clicks turns it off.
What coils fit the PockeX?
Aspire PockeX U-Tech coils in 0.6Ω and 1.2Ω.
Which PockeX coil is best for nic salts?
The 1.2Ω Kanthal coil.
What does the red light on the PockeX mean?
Less than 30% battery left. Blue means more than 30%.
How much does the PockeX tank hold?
2ml.
How long should I prime a PockeX coil?
Aspire says 2–3 minutes after filling; we give a brand-new coil five.
Is the Aspire PockeX good for beginners?
Yes – one button, no settings and a replaceable coil.
Reviews
There are no reviews yet.