Vaporesso ARMOUR G Vape Kit

Vaporesso ARMOUR G Kit: 80W Pod Mod with a 3000mAh Battery

The Vaporesso ARMOUR G is a compact 80W pod mod that runs on replaceable GTX coils. Vaporesso’s Mega Batt cell technology fits a 3000mAh battery into a body just 113mm tall – about 30% smaller than other pod mods of the same capacity, on Vaporesso’s figures – and the AXON chip’s Neo Pulse mode holds the output steady from a full charge down to 10%. A 0.96-inch TFT screen, a top-fill, top-airflow pod and a car-seat-style grip finish complete it.

The kit we sell is the DTL version: an ARMOUR G Series DTL pod with a GTX 0.2Ω mesh coil fitted and a 0.4Ω in the box. Because the coil is separate from the pod, you replace a small coil rather than a whole pod, and you can switch between a cloud setup and a mouth-to-lung one. Below: specs, coil wattages, which pods and coils fit, setup, battery, troubleshooting, ARMOUR G vs ARMOUR GS, colours and box contents.

Vaporesso ARMOUR G Specifications

Vaporesso’s figures for the ARMOUR G DTL kit:

Which Pods and Coils Fit the ARMOUR G?

The ARMOUR G takes Vaporesso’s ARMOUR G Series pods – empty pods that each hold one GTX coil.

Spare pods are our Vaporesso ARMOUR G Series replacement pods, sold in DTL and MTL versions. The DTL pod takes GTX coils from 0.15Ω to 0.4Ω and has a wider, airier draw; the MTL pod takes 0.6Ω to 1.2Ω for a tighter pull. Vaporesso lists both for the ARMOUR G, so changing pods is how you switch styles on the same device.

For coils, our Vaporesso GTX coils 5 pack come in 0.15Ω, 0.2Ω and 0.3Ω for the DTL pod and 0.6Ω, 0.8Ω and 1.2Ω for the MTL pod. The GTX 0.4Ω in the box is on Vaporesso’s list too, but we don’t currently stock it as a spare.

Will not fit: GTi coils. GTi and GTX are separate platforms; Vaporesso GTi coils are for the iTank tanks on the ARMOUR MAX, S and ULTRA.

Getting Started with the ARMOUR G

1. Charge the ARMOUR G over Type-C before first use.
2. Take the pod out and check the GTX 0.2Ω coil is pushed firmly into its base.
3. Fill the pod from the top, leaving a small air gap, then give the coil five minutes to soak.
4. Set the wattage for your coil – Vaporesso suggests 45–60W for the 0.2Ω – and start at the low end.
5. Choose one of the four top-airflow levels, and use the lock button whenever it goes in a pocket.

ARMOUR G Battery Life and Charging

3000mAh is a big battery for a pod mod this size, and Neo Pulse is designed to make the most of it: Vaporesso says output stays stable from 100% right down to 10%, so the vape doesn’t fade as the charge drops. How long a charge lasts depends on the coil. A GTX 0.2Ω at 50W empties it far faster than a 0.8Ω at 14W, so heavy DTL vapers should plan on charging daily, while MTL users on the higher-resistance coils will go well beyond that. It charges at 5V/2A over Type-C.

ARMOUR G Troubleshooting

ARMOUR G vs ARMOUR GS

Prefer to swap batteries rather than wait for a charge? The Vaporesso ARMOUR GS is the same pod mod built around a removable 18650.

GTX Coil Guide for the ARMOUR G

Vaporesso’s own wattage ranges for each GTX coil, with the pod it belongs in and the e-liquid its chart suggests (capped at 20mg, the UK limit):

ARMOUR G Colours

Vaporesso makes the ARMOUR G in ten colours: Black, Brown, Silver, Blue, Green, Pink, Red, Grey Knight, Pastel Lilac and Nebula Green. We currently have Grey Knight and Pastel Lilac in stock; the options above show live availability.

What’s in the Box

One ARMOUR G, an ARMOUR G Series DTL pod, a GTX 0.2Ω mesh coil (fitted), a GTX 0.4Ω mesh coil, a Type-C cable and a user manual with warranty card.

Best E-Liquids for the ARMOUR G

In the DTL pod on the 0.15Ω to 0.4Ω coils, use a high-VG shortfill e-liquid at 3mg or 6mg. In the MTL pod on the 0.6Ω to 1.2Ω coils, nic salts up to 20mg or 50/50 freebase from our 10ml e-liquids work well. Vaporesso’s GTX chart makes the same split.

Buy the ARMOUR G Near You

Need the ARMOUR G today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock Vaporesso pods, coils and kits, and the team can check which resistance suits your device and e-liquid. We can fit your first GTX coil and set the wattage and airflow with you. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.

You May Also Like

• Vaporesso ARMOUR G Series Replacement Pods
• Vaporesso GTX Coils
• Vaporesso ARMOUR GS Vape Kit
• Vaporesso Vape Kits Brand Review
• All Vaporesso Vapes

Frequently Asked Questions

Is the Vaporesso ARMOUR G good?

For a compact, long-lasting pod mod with a choice of coils, yes: 80W, a 3000mAh battery and GTX coils from 0.15Ω to 1.2Ω.

What coils does the ARMOUR G use?

Vaporesso GTX coils. The DTL pod takes 0.15Ω to 0.4Ω; the MTL pod takes 0.6Ω to 1.2Ω.

Does the ARMOUR G use GTi coils?

No. GTi is a separate platform and won’t fit the ARMOUR G pod.

What wattage should I use with the 0.2 ohm coil?

Vaporesso suggests 45–60W.

Can I use nic salts in the ARMOUR G?

Yes, in the MTL pod with a 0.6Ω to 1.2Ω GTX coil. Keep strong salts out of the DTL pod’s sub-ohm coils.

What is the difference between the ARMOUR G and ARMOUR GS?

The ARMOUR G has a built-in 3000mAh battery; the GS takes a removable 18650 and is 13mm taller.

How many themes does the ARMOUR G have?

Three – Race Car, General and RIM – on its 0.96-inch TFT screen.