Description
Vaporesso VIBE Dual Mesh Smart Pods: One Pod, Two Modes
The Vaporesso VIBE Dual Mesh Smart Pod has two independent mesh coils stacked one above the other, and the VIBE device decides how many to fire. In ECO mode one mesh fires at a time, alternating puff to puff; in PWR mode both fire together. Vaporesso’s slogan for it is "one pod, two experiences". Two pods per pack.
That’s why the listing shows two resistances per pod. "0.6/0.8" means one pod that reads 0.8Ω in ECO (one mesh) and 0.6Ω in PWR (both meshes). The "0.7/1.0" pod works the same way at 1.0Ω and 0.7Ω. You’re choosing a pod, not a single resistance.
🔌 Vaporesso VIBE Dual Mesh Smart Pods
✔ Two pods per pack
✔ Two independent mesh coils, built in
✔ ECO: one mesh, longer life
✔ PWR: both meshes, more vapour
✔ 0.6/0.8Ω or 0.7/1.0Ω
✔ Fits the whole VIBE series
VIBE Smart Pod: ECO and PWR Wattage
Vaporesso publishes the wattage each mode runs at. Its VIBE Smart Pod page and its VIBE SE 2 page give slightly different figures, so we show both. Output is constant in both modes.
| Pod | ECO mode (one mesh) | PWR mode (both meshes) |
|---|---|---|
| 0.6/0.8Ω | 0.8Ω at 14W (15W on the SE 2 page) | 0.6Ω at 24W (28W on the SE 2 page) |
| 0.7/1.0Ω | 1.0Ω at 12W (13W on the SE 2 page) | 0.7Ω at 20W (22W on the SE 2 page) |
Which Devices Do VIBE Smart Pods Fit?
Vaporesso says the Smart Pod fits all VIBE series devices: the VIBE, VIBE Nano, VIBE Nano Pro and VIBE SE, and the VIBE SE 2 ships with the 0.6/0.8Ω version.
We don’t currently sell a VIBE device, so these pods are here for existing owners. Vaporesso lists them for the VIBE, VIBE Nano, VIBE Nano Pro and VIBE SE, and the VIBE SE 2 ships with the 0.6/0.8Ω version. The ECO/PWR switch on the device’s AXON chip is what decides whether one mesh fires or both.
Will not fit: XROS, LUXE X, LUXE Q or ECO NANO devices. Vaporesso’s older VIBE Series 0.8Ω / 1.0Ω Dual Mesh pod is a separate product.
How to Fill a VIBE Smart Pod
- Open the hinged fill port on the pod.
- Fill slowly, watching the level through the clear body.
- Close the port until it’s flush.
- On the VIBE SE 2, Vaporesso says you can refill without taking the pod out; on other VIBEs, lift it out first.
- Leave a new pod a few minutes to soak both meshes before the first puff.
How Long Does a Pod Last?
Vaporesso’s lab says ECO mode doubles pod life (a 200% figure) because each mesh only fires on alternate puffs, and PWR mode gives 50% more vapour. The trade is simple: stay in ECO and a pod lasts longer; live in PWR and it wears sooner. Most customers get one to two weeks.
VIBE Smart Pod Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Flavour weaker than expected | You’re probably in ECO. Switch the device to PWR. |
| Pod wearing out fast | PWR fires both meshes on every puff. Use ECO for everyday vaping. |
| Spitting | Vaporesso’s HyperFlow cotton is designed to prevent spitback; if it happens, the pod may be overfilled. Leave a gap at the top. |
| Burnt taste | The pod wasn’t soaked, or it’s worn out. |
ECO or PWR: Which Should You Use?
Think of ECO as your all-day setting: cooler, smoother, easier on the pod. PWR is for when you want a bigger hit of flavour – after a meal, or with a dessert liquid. Because both meshes are in the one pod, you can switch as often as you like without swapping anything. Vaporesso also credits its HyperFlow cotton with 40% more intense aroma and 25% better flavour.
Best E-Liquids for These Pods
VIBE devices are MTL, so nic salts at 10mg or 20mg are the natural choice – try Dojoliq, Vaporesso’s own. A 50/50 freebase from our 10ml e-liquids also works. For the difference between them, read nic salts vs freebase.
Buy VIBE Smart Pods Near You
Need VIBE Smart Pods today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock Vaporesso pods, coils and kits, and the team can check which resistance suits your device and e-liquid. Tell us whether you vape on ECO or PWR and we’ll suggest a pod. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
Frequently Asked Questions
What do the two resistances on a VIBE pod mean?
They’re the ECO and PWR readings of one pod: one mesh firing, or both.
Do VIBE Smart Pods fit the VIBE SE?
Yes. Vaporesso says they fit all VIBE series devices.
Which VIBE pod is best for nic salts?
The 0.7/1.0Ω in ECO for 20mg; the 0.6/0.8Ω for more flavour at 10mg.
Can I switch between ECO and PWR with the same pod?
Yes. That’s the point of the Smart Pod: the mode switch is on the device.
How many pods are in a pack?
Two.
Reviews
There are no reviews yet.