Description
Aspire Breeze 2 Replacement Pod
The Aspire Breeze 2 replacement pod is the pod for the Aspire Breeze 2, supplied here in the 0.6Ω version. Aspire has since retired the Breeze 2 from its current range, so replacement pods are getting harder to find – if your Breeze 2 still does the job, this keeps it going.
The Breeze 2 pod uses a replaceable coil: Aspire’s Breeze 2 0.6Ω coil, which is the same as the original Breeze 0.6Ω coil. Airflow is set by removing the mouthpiece and turning the ring on top of the pod.
🔌 Aspire Breeze 2 Replacement Pod
✔ Replacement pod for the Aspire Breeze 2
✔ 0.6Ω version
✔ Bottom fill under a silicone seal
✔ Takes Breeze 2 coils
✔ Airflow ring under the mouthpiece
Breeze 2 Coils
Aspire made two coils for the Breeze 2:
| Coil | Best with | Notes |
|---|---|---|
| 0.6Ω | 50/50 freebase or lower-strength nic salts | Same as the original Breeze 0.6Ω coil |
| 1.0Ω | Nic salts | Aspire’s recommendation for nic salt |
Which Device Does This Pod Fit?
This is the Breeze 2’s own pod. It isn’t designed for the original Breeze or other Aspire devices.
This pod fits the Aspire Breeze 2 only. We no longer sell the Breeze 2 device, but we keep the pods so existing owners can carry on using theirs.
Will not fit: the original Aspire Breeze, and Gotek, PIXO, Minican or Flexus devices.
How to Fill the Breeze 2 Pod
- Squeeze the release buttons on each side of the Breeze 2 and slide the pod out.
- Turn the pod over and lift the silicone seal.
- Fill through the hole and press the seal back firmly.
- Push the pod back into the device until it clicks.
- With a new coil, let the pod stand for five minutes before vaping.
How Long Does a Pod Last?
On a replaceable-coil pod, it’s the coil that wears – usually five to ten days. The pod itself lasts much longer unless it cracks or the seal wears.
Breeze 2 Pod Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Leaking | Press the silicone seal firmly back and check the coil is seated. |
| Burnt taste | The coil is worn or wasn’t soaked. Fit a fresh coil and wait five minutes. |
| Pod won’t click in | Squeeze both release buttons and slide it in straight. |
Best E-Liquids for These Pods
With the 0.6Ω coil, choose 50/50 freebase from our 10ml e-liquids or 10mg nic salts.
Buy Breeze 2 Pods Near You
Need Breeze 2 pods today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. Ask us about coils for your Breeze 2. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
Frequently Asked Questions
Does the Breeze 2 pod fit the original Breeze?
No. It’s made for the Breeze 2.
Which coils does the Breeze 2 pod take?
Breeze 2 coils in 0.6Ω and 1.0Ω. The 0.6Ω is the same as the original Breeze 0.6Ω coil.
Is the Breeze 2 still made?
Aspire has retired it from its current range, so pods are becoming scarce.
Reviews
There are no reviews yet.