Description
SMOK Stick AIO Coils: 0.23 Ohm Dual Coil
SMOK Stick AIO coils in 0.23Ω are the dual-coil heads for the Stick AIO, SMOK’s pen-style kit with a built-in glass tank and a 1600mAh battery. SMOK prints 25–45W on the coil and describes it as massive clouds, smooth airflow and balanced e-liquid wicking through a bi-directional four-hole design.
The Stick AIO is discontinued, but its coils are still what keeps one running. SMOK made two resistances for it, 0.23Ω and 0.6Ω; we stock the 0.23Ω. They’re specific to the Stick AIO – not the Stick M17, V8 Stick or Stick Prince.
🔌 SMOK Stick AIO 0.23 Ohm Dual Coil
✔ Dual coils
✔ 0.23Ω resistance
✔ SMOK: 25–45W
✔ Bi-directional four-hole wicking
✔ For the SMOK Stick AIO
✔ Not for the Stick M17 or V8 Stick
Stick AIO Coil Options
SMOK’s compatibility table lists two Stick AIO coils.
| Coil | SMOK figure | Stocked |
|---|---|---|
| Stick AIO 0.23Ω (this page) | 25–45W, dual coils | Yes |
| Stick AIO 0.6Ω | Listed by SMOK; wattage not found | No |
What Does the Stick AIO Coil Fit?
SMOK lists the Stick AIO coil series for one kit: the Stick AIO.
The Stick AIO isn’t a kit we sell now, so these coils are for owners. They won’t fit the Stick M17 – that pen takes SMOK Stick M17 coils.
Will not fit: the Stick M17, Priv M17, V8 Stick, Stick Prince or any TFV tank.
How to Fit and Prime a Stick AIO Coil
- Unscrew the drip tip and top cap to reach the coil head, as shown in SMOK’s schematic.
- Pull out the used coil.
- Wet the new coil through all four wicking holes.
- Fit it, then refill through the top: SMOK’s design uses a rotary top cap for filling.
- Wait five minutes before the first puff.
How Long Does a Stick AIO Coil Last?
On a fixed-output pen the coil’s life depends mostly on the e-liquid and how often the tank runs low. With a clear e-liquid, around a week is typical. SMOK gives no figure.
Stick AIO Coil Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Burnt taste | Tank ran low, or the coil wasn’t primed. |
| Leaking | Coil not fully fitted, or the top cap isn’t closed. |
| Wrong coil | Stick M17 coils look similar but don’t fit. |
| No vapour | Check the battery; SMOK’s indicator blinks rapidly when it’s low. |
Best E-Liquids for the Stick AIO
A 0.23Ω coil suits freebase at low strength, 50/50 to 70/30 VG, from our 10ml e-liquids or a shortfill e-liquid with a nicotine shot. Nic salts are too strong for this coil.
Buy Stick AIO Coils Near You
Need Stick AIO coils today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. Bring your Stick AIO and we’ll fit the first coil with you. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
- SMOK Stick M17 Coils
- SMOK RPM 2 Coils
- Vape Coils Guide for Beginners
- 10ml E-Liquids
- All SMOK Products
Frequently Asked Questions
Do Stick AIO coils fit the Stick M17?
No. The Stick M17 takes Stick M17 coils.
What wattage is the Stick AIO coil?
SMOK prints 25–45W on the 0.23Ω.
Is the Stick AIO still made?
SMOK lists it as discontinued. The coils are still available for owners.
Reviews
There are no reviews yet.