Description
Aspire BP Coils: 0.3 Ohm Mesh and 0.6 Ohm for the BP60, BP80 and BP Stik
Aspire BP coils are the coils from Aspire’s BP platform, five to a pack. We list two: the 0.3Ω meshed coil and the 0.6Ω coil, the pair Aspire put in the BP60.
The BP platform has grown since then. Aspire now lists both coils for the BP80, BP Stik, Rhea X and the Veynom Air, EX and LX, and the 0.3Ω mesh for the Revolto and the Huracan EX and LX as well.
🔌 Aspire BP Coils at a Glance
✔ Five coils per pack
✔ 0.3Ω meshed, 30–40W
✔ 0.6Ω double-shot, 15–25W
✔ Kanthal AF wire (Aspire, BP60)
✔ BP60, BP80, BP Stik, Veynom, Rhea X
✔ Not the BP-F coils for the H2 tank
BP Coil Resistances and Wattage
Aspire’s figures, from its BP60 FAQ and BP coil page. Aspire describes the 0.6Ω as a double-shot coil, with two heating wires for rich flavour, and the 0.3Ω mesh as the one for intense flavour and dense vapour.
| Coil | Wattage (Aspire) | Aspire’s description |
|---|---|---|
| BP Meshed 0.3Ω | 30–40W | Intense flavour, dense vapour |
| BP 0.6Ω | 15–25W | Double-shot: two heating wires, rich flavour |
Which Devices Take Aspire BP Coils?
Both coils fit the BP60 (it ships with them), the BP80, the BP Stik, the Rhea X in its Huracan Mini tank, and the Veynom Air, EX and LX. The 0.3Ω mesh also fits the Revolto and the Huracan EX and LX, in their Huracan tank.
We don’t currently stock a BP-platform device, so this pack is for existing BP60, BP80, BP Stik, Rhea X and Veynom owners. Our Aspire range shows what we carry.
Will not fit: the H2 tank or the Revolto S – Aspire lists those for its separate BP-F coils.
How to Change a BP Coil
- Take the pod or tank off the device and empty it.
- Remove the old coil.
- Wet the cotton through the new coil’s side holes, and add a drop to the top.
- Fit the new coil firmly, refit the pod and fill it.
- Wait about five minutes, then start at the bottom of the coil’s range.
How Long Does a BP Coil Last?
Aspire doesn’t publish a figure. The 0.6Ω at 15–25W generally outlasts the 0.3Ω mesh at 30–40W, because it does less work. Sweet e-liquids shorten both. Change the coil when the flavour dulls.
BP Coil Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Burnt taste from a new coil | It wasn’t primed, or wasn’t given long enough to soak. Prime the next one and wait. |
| Weak vapour on the 0.3Ω | Your device may not be reaching 30W. Check its settings, or use the 0.6Ω. |
| Harsh on nic salts | Salts suit the 0.6Ω, not the 0.3Ω mesh. |
| The coil won’t fit | BP-F coils look similar but are a separate series. Check your tank’s name. |
Best E-Liquids for BP Coils
With the 0.6Ω, use nic salts at 10mg, or a 50/50 freebase e-liquid at 6mg to 12mg. With the 0.3Ω mesh, use a higher-VG freebase at 3mg or 6mg: a shortfill e-liquid is ideal.
Buy Aspire BP Coils Near You
Need Aspire BP coils today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock Aspire coils, tanks and pods, and the team can check which resistance suits your device and e-liquid. Bring your BP device and we’ll match the coil to its pod. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
Frequently Asked Questions
What coils does the Aspire BP60 use?
The BP Meshed 0.3Ω (30–40W) and the BP 0.6Ω (15–25W). Both are on this page.
Do BP coils fit the BP80?
Yes. Aspire lists both for the BP80’s pod.
Are BP and BP-F coils the same?
No. Aspire lists BP-F coils separately, for the H2 tank and the Revolto S.
Which BP coil is best for nic salts?
The 0.6Ω.
How many coils are in a pack?
Five.
What is a double-shot coil?
Aspire’s name for the BP 0.6Ω: two heating wires in one coil, for richer flavour.
Kevin Jennings (verified owner) –