SKU: Vaporesso Eco Nano Categories: , Brand:

Vaporesso Eco Nano Replacement Pods

£7.99

Vaporesso ECO NANO 0.6Ω mesh replacement pods, two per pack. Bottom-fill MTL pod rated 18-22W; fits the ECO NANO, ECO NANO 2, ECO NANO Pro and ECO NANO Plus.

Description

Vaporesso ECO NANO Replacement Pods: 0.6 Ohm Mesh

The Vaporesso ECO NANO replacement pod is the bottom-fill mesh pod for Vaporesso’s ECO NANO family – the ECO NANO, ECO NANO 2, ECO NANO Pro and ECO NANO Plus. Two pods to a pack, coil built in. We stock the 0.6Ω, the fullest-flavoured pod in the range and the one Vaporesso rates highest for power at 18–22W.

Vaporesso makes two 0.6Ω ECO NANO pods: the original Mesh pod with COREX heating, and the newer Lush Mesh with COREX Smooth, added alongside the ECO NANO 2. Both fit the same devices. If the version matters to you, check the box or ask us in store.

COREX mesh heating inside a Vaporesso ECO NANO pod
COREX mesh heating inside an ECO NANO pod.

🔌 Vaporesso ECO NANO 0.6 Ohm Replacement Pods

✔ Two pods per pack
✔ 0.6Ω mesh, built in
✔ MTL draw at 18–22W
✔ Bottom filling
✔ Fits ECO NANO, ECO NANO 2, Pro and Plus
✔ Nic salts or 50/50 freebase

ECO NANO Pod Resistances

Vaporesso’s store lists the ECO NANO pods as MTL, with the 0.6Ω rated at 18–22W. Its beginner advice is to start on the 0.8Ω or 1.2Ω and move down to the 0.6Ω when you want more flavour.

Resistance Wattage Draw Best with
0.6Ω (Mesh or Lush Mesh) 18–22W MTL, the loosest ECO NANO pod Our pick for flavour – 10mg or 20mg nic salts
0.8Ω Not published MTL Vaporesso’s beginner starting point
1.2Ω Not published Tight MTL The most cigarette-like
White Vape Co recommends: if you’ve been on the 0.8Ω and want more flavour, the 0.6Ω is the natural next step. Pair it with 10mg nic salts for a smoother vape, or 20mg if you’re newer to switching from smoking.

Which Devices Do ECO NANO Pods Fit?

Vaporesso lists its ECO NANO pods for the ECO NANO, ECO NANO 2, ECO NANO Pro and ECO NANO Plus, and says the Lush 0.6Ω also fits the original ECO NANO.

We don’t currently sell an ECO NANO device, but we keep these pods for existing owners. They fit the ECO NANO, ECO NANO 2, ECO NANO Pro and ECO NANO Plus, so an upgrade within the family doesn’t strand your spares.

Will not fit: XROS devices – Vaporesso’s own chart says to use XROS pods there – or LUXE X, LUXE Q and VIBE devices.

Close-up of the Vaporesso ECO NANO pod mouthpiece and chamber
The ECO NANO pod mouthpiece and chamber.

How to Fill an ECO NANO Pod

  1. Pull the pod out of the device.
  2. Turn it over to find the fill port on the bottom.
  3. Open the port and fill slowly, leaving a small gap.
  4. Close the port firmly, dry the pod and the contacts, and refit.
  5. Give a new pod a few minutes to soak before vaping. Vaporesso doesn’t specify a time; five minutes is our shop advice.

How Long Does a Pod Last?

Vaporesso says its COREX heating extends pod life by 50%, and its store puts ECO NANO pods at six to eight refills before the flavour degrades – one to two weeks for a daily vaper. The 0.6Ω draws the most power in the range, so expect the shorter end.

ECO NANO Pod Troubleshooting

Problem Likely cause and fix
Liquid on the base The bottom port wasn’t closed properly. Push it home and wipe the contacts.
Too much vapour or harsh The 0.6Ω is the loosest pod. Try 10mg salts, or step back to the 0.8Ω.
Dry hit on a new pod Not soaked long enough. Wait a few minutes after the first fill.
Flavour dropping off The mesh is worn. Swap to a fresh pod.

Mesh vs Lush Mesh 0.6 Ohm

Vaporesso introduced the Lush Mesh with the ECO NANO 2. It uses COREX Smooth heating and re-tuned cotton for what Vaporesso calls a more intense burst of flavour and more puffs per pod. The original 0.6Ω Mesh uses Morph Mesh and COREX cotton. They fit the same devices and vape at the same resistance, so either will do the job.

Best E-Liquids for These Pods

Made for MTL, so nic salts at 10mg or 20mg are the best match – Vaporesso’s Dojoliq nic salts are a good place to start. A 50/50 freebase from our 10ml e-liquids works too. Skip thick shortfills.

Buy ECO NANO Pods Near You

Need ECO NANO pods today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock Vaporesso pods, coils and kits, and the team can check which resistance suits your device and e-liquid. We can check which 0.6Ω version is on the shelf. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.

You May Also Like

Frequently Asked Questions

Do ECO NANO pods fit the ECO NANO 2 and Pro?

Yes. Vaporesso lists the ECO NANO pods for the ECO NANO 2, Pro and Plus.

What wattage is the ECO NANO 0.6 pod?

18–22W, by Vaporesso’s store spec.

Is this the Lush Mesh or standard Mesh?

Our listing is the 0.6Ω; the box shows which version. Both fit the same devices.

How many pods are in a pack?

Two.

Specifications

ohm

0.6ohms, 1.2ohms, 0.8ohms

Reviews are from customers who bought the product from us. Vape Club members receive loyalty points for leaving a review, whether it is positive or negative. We do not remove reviews for being negative.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.