SKU: N/A Categories: , Tag: Brand:

OXVA NeXlim Replacement Pods – 3 Pack

(4 customer reviews)

£9.99

OXVA NeXlim dual mesh replacement pods, three per pack, in 0.6Ω, 0.8Ω and 1.2Ω. Vape on Boost? Choose the 0.8Ω. In Eco, the 0.6Ω with nic salts gives the best flavour. Not compatible with XLIM devices.

Description

OXVA NeXlim Replacement Pods: Dual Mesh Refills for the NeXlim

The OXVA NeXlim replacement pod is the dual mesh cartridge made for the original OXVA NeXlim pod kit. Two mesh strips share the heating, which is where the NeXlim’s bigger, rounder flavour comes from. It comes three to a pack in 0.6Ω, 0.8Ω and 1.2Ω, with a top-fill tank, a five-layer leak-proof design and the coil built in.

Two things to know before you order. NeXlim and XLIM pods are not interchangeable – they are different shapes. And every NeXlim device has a Boost mode, which changes the resistance we recommend. Both are covered below.

Two OXVA NeXlim dual mesh pods, 0.6 ohm
The NeXlim dual mesh pod: clear top-fill tank, colour-coded base.

🔌 OXVA NeXlim Replacement Pods

✔ Three pods per pack
✔ Dual mesh coil built in
✔ 0.6Ω, 0.8Ω and 1.2Ω
✔ Top-fill, five-layer leak-proof design
✔ Runs in Boost and Eco mode
✔ Made for the OXVA NeXlim pod kit

Which NeXlim Pod Resistance? Boost vs Eco

Every NeXlim has two power modes. Boost pushes more power through the coil for maximum flavour and vapour. Eco runs gentler for longer battery and pod life. The right resistance depends on which one you use most.

Resistance Draw On Boost On Eco
0.6Ω RDL Not recommended – too much power for this coil Our pick for nic salts – the best flavour hit
0.8Ω RDL or MTL Our pick for Boost Smooth and slightly cooler
1.2Ω MTL A tighter, cooler draw The longest-lasting, most cigarette-like
White Vape Co recommends: if you use Boost, choose the 0.8Ω NeXlim pods – the 0.6Ω burns out quickly on Boost because of the extra power going through it. If you vape in Eco or do not use Boost, go for the 0.6Ω with nic salts for the best flavour hit of the three.
OXVA NeXlim dual mesh pod range in 0.6, 0.8 and 1.2 ohm
The NeXlim cartridge range: 0.6Ω RDL, 0.8Ω RDL/MTL and 1.2Ω MTL.

Which Devices Do NeXlim Pods Fit?

OXVA designed this cartridge for the original NeXlim kit. If you own one of the newer models, the NeXlim Unitech 3 replacement pods are the version OXVA lists for all four NeXlim devices, so they are the safer buy.

This pod was designed for the original OXVA NeXlim Pod Vape Kit – the 40W, 1500mAh NeXlim with a colour screen and Boost and Eco modes. In that kit it gives you the full dual mesh experience: pick the 0.8Ω if you vape on Boost, or the 0.6Ω for Eco with nic salts.

Own a newer NeXlim? For the OXVA NeXlim 2, OXVA NeXlim 2 Mini or OXVA NeXlim GO, OXVA lists the NeXlim Unitech 3.0 pods, so that is the version we recommend. No NeXlim pod fits an XLIM.

Will not fit: any XLIM device, including the XLIM Pro 3, 3 Ultra, SQ Pro 2 and GO 2. XLIM kits need XLIM V3 replacement pods or XLIM EZ pods.

How to Fill a NeXlim Pod

  1. Pull the pod out of the NeXlim.
  2. Open the top-fill plug and fill slowly, leaving a small gap at the top.
  3. Close the plug firmly all the way round and wipe the pod and the contacts dry.
  4. Refit the pod and leave a new one to soak for a few minutes.
  5. Take your first few puffs in Eco before switching to Boost.

How Long Does a Pod Last?

On a NeXlim, pod life depends heavily on the mode. In Eco a pod lasts noticeably longer, while on Boost – especially at low resistance – the coil works much harder. Dual mesh spreads the heat across two strips, which helps. As a rule of thumb, change the pod when the flavour dulls or you notice a burnt edge. If you are getting through pods quickly on Boost, move up to the 0.8Ω.

NeXlim Pod Problems and Fixes

Problem Likely cause and fix
Pods burning out within days Almost always a 0.6Ω pod on Boost. Switch to 0.8Ω for Boost, or keep the 0.6Ω in Eco.
Leaking The top plug is not fully closed, or the pod is overfilled. Close it all the way round and leave an air gap.
Spitting or gurgling Liquid in the airway. Remove the pod, wrap the mouthpiece in tissue and flick it firmly.
Burnt taste on a new pod Not soaked long enough, or went straight to Boost. Give the next one a few minutes and start in Eco.
No pod detected Clean the contacts and reseat the pod. Check it is a NeXlim pod – XLIM pods do not fit.

NeXlim Pods vs NeXlim Unitech 3.0 Pods

NeXlim pod NeXlim Unitech 3.0 pod
Coil Dual mesh Unitech 3.0 dual mesh
Made for The original NeXlim kit NeXlim, NeXlim GO, NeXlim 2 and NeXlim 2 Mini
Ready to vape Let it soak for a few minutes About 30 seconds
Spit and condensation control Five-layer leak-proof design Larger condensate chamber and triple anti-leak
Resistances 0.6, 0.8, 1.2Ω 0.6, 0.8, 1.2Ω

If you are not sure which NeXlim you have, the Unitech 3.0 pod is OXVA’s current cartridge and covers every model. Our NeXlim vs NeXlim GO guide compares the kits themselves.

Best E-Liquids for These Pods

NeXlim pods are made for nic salts and 50/50 freebase. OXVA’s own Ox Passion nic salts are the natural partner, and our 10ml e-liquids cover freebase. On Boost with the 0.8Ω, 10mg salts are plenty for most people, because the extra vapour carries more nicotine per puff.

Buy NeXlim Pods Near You

Need NeXlim pods today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock OXVA pods and kits, and the team can check which resistance suits your device and e-liquid. Tell us whether you vape on Boost or Eco and we will point you to the right resistance. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.

You May Also Like

Frequently Asked Questions

Which NeXlim pod should I use on Boost?

The 0.8Ω. The 0.6Ω burns out quickly on Boost. Save the 0.6Ω for Eco with nic salts.

Which NeXlim pod gives the best flavour?

In Eco, the 0.6Ω with nic salts gives the best flavour hit.

Do these pods fit the NeXlim 2 or NeXlim 2 Mini?

OXVA lists the Unitech 3.0 version for the NeXlim 2, NeXlim 2 Mini and NeXlim GO, so that is the pod we recommend for those devices.

Are NeXlim and XLIM pods interchangeable?

No. They are different pods and will not fit each other’s devices.

Why are my NeXlim pods burning out so fast?

Most often it is a 0.6Ω pod on Boost. Switch to 0.8Ω, or use Eco. Very sweet liquids shorten pod life too.

Is NeXlim better than XLIM?

Neither is simply better. NeXlim uses dual mesh pods, up to 40W and Boost and Eco modes for bigger flavour and vapour. XLIM is smaller and simpler, with a wider choice of pods. The pods are not interchangeable, so choose the system first.

How long do OXVA NeXlim pods last?

Longer in Eco, shorter on Boost. Most customers get around a week from each pod. If yours burn out in days, it is usually a 0.6Ω being run on Boost.

How many pods are in a pack?

Three.

Specifications

ohm

0.6ohms, 1.2ohms, 0.8ohms, XL 0.6ohm, XL 0.8ohm, XL 1.2ohm

Reviews are from customers who bought the product from us. Vape Club members receive loyalty points for leaving a review, whether it is positive or negative. We do not remove reviews for being negative.

4 reviews for OXVA NeXlim Replacement Pods – 3 Pack

  1. Michelle Smith (verified owner) –

  2. Paul Hobbs (verified owner) –

  3. Jo king (verified owner) –

  4. kevin (verified owner) –

Only logged in customers who have purchased this product may leave a review.