Description
SMOK TFV Mini V2 S2 Coils: 0.15 Ohm Quadruple Coil
The SMOK TFV Mini V2 S2 coil packs four coils into a 0.15Ω head and is the lowest-wattage coil in the Mini V2 family: SMOK rates it 30–70W, best at 45–60W. SMOK also gives it a more restricted airflow and extra direct wicking channels, which it says give it a longer life span.
Our old listing called the S2 a single-mesh coil. It isn’t – that’s the S1. The S2’s quadruple build and tighter draw make it the pick for anyone who finds sub-ohm tanks too airy, or whose device can’t hold 60W+ for long.
🔌 SMOK TFV Mini V2 S2 0.15 Ohm Quadruple Coil
✔ Four coils in one head
✔ 0.15Ω resistance
✔ SMOK: 30–70W, best 45–60W
✔ More restricted airflow
✔ Extra direct wicking channels
✔ Custom made for Stick-series batteries
Where the S2 Sits in the Mini V2 Range
From least to most power, using SMOK’s best ranges:
| Coil | Build | SMOK best |
|---|---|---|
| S2 (this page) | Quadruple | 45–60W |
| S1 | Single mesh | 60–70W |
| A3 | Triple | 100–120W |
| A1 | Single, large | 110–130W |
Which Kits Take the Mini V2 S2?
SMOK’s compatibility table lists the Mini V2 series for the TFV Mini V2 tank and for four kits: the Stick V9, Stick V9 Max, R-Kiss and Species. SMOK publishes an identical list for its Baby V2 series, because the TFV Mini V2 is the TFV8 Baby V2 tank under a new name.
The S2 is the coil we’d suggest for the Stick V9’s lower power. If you want more vapour from the same tank, the SMOK TFV Mini V2 S1 opens the draw up.
Will not fit: the original TFV8 Baby, TFV8 Big Baby, TFV8 X-Baby or full-size TFV8. The V8 Baby coils for those tanks are shorter, and V8 Baby coils don’t fit a Mini V2 tank either.
How to Fit and Prime the S2
- Take the tank off, empty it and unscrew the base.
- Remove the old coil and wipe condensation from the base.
- Drip e-liquid into each of the S2’s wicking channels and down the centre.
- Screw it into the base and put the tank back together.
- Fill, wait five minutes and begin at 40W.
How Long Does a Mini V2 S2 Coil Last?
SMOK credits the extra wicking channels with a longer life span, and at 45–60W the S2 is easy on cotton. It’s usually the longest-lasting coil in the Mini V2 range for our customers.
Mini V2 S2 Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Draw feels too tight | That’s the S2’s design. Open the tank’s airflow, or choose the S1. |
| Weak flavour at 30W | Bottom of SMOK’s range. Try 45–50W. |
| Spitting | Primed too heavily. Tip the tank upside down and fire two short pulses. |
| Mistaken for a single mesh | The single mesh is the S1; the S2 is quadruple. |
TFV Mini V2 vs V8 Baby vs V8 X-Baby Coils
| Coil family | Tank | Example coils |
|---|---|---|
| TFV Mini V2 (Baby V2) | TFV Mini V2 / TFV8 Baby V2 | S1, S2, A1, A2, A3 |
| V8 Baby | TFV8 Baby, Big Baby, TFV12 Baby Prince | Mesh, Q2, T12, X4 |
| V8 X-Baby | TFV8 X-Baby only | Q2, X4, T6, M2 |
Three families with similar names and none of them interchangeable.
Best E-Liquids for the S2
The tighter draw suits a slightly lower-VG freebase than the A-series coils need: 50/50 to 70/30 at 3mg or 6mg. Try our 10ml e-liquids or a shortfill e-liquid with a nicotine shot.
Buy Mini V2 S2 Coils Near You
Need TFV Mini V2 S2 coils today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. We’ll help you pick between the S1 and S2 for your device. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
- SMOK TFV Mini V2 S1 Coils
- SMOK TFV Mini V2 A3 Coils
- SMOK V8 X-Baby X4 Coils
- 10ml E-Liquids
- All SMOK Products
Frequently Asked Questions
Is the Mini V2 S2 a mesh coil?
No. SMOK describes it as 0.15Ω quadruple coils.
What wattage for the Mini V2 S2?
SMOK rates it 30–70W, best 45–60W.
Which is tighter, S1 or S2?
The S2. SMOK gives it more restricted airflow.
Reviews
There are no reviews yet.