Description
SMOK TFV Mini V2 S1 Coils: 0.15 Ohm Single Mesh
The SMOK TFV Mini V2 S1 coil is a 0.15Ω single-mesh coil that SMOK built for lower power: 40–80W, best at 60–70W. SMOK says it was custom made for its Stick-series batteries, focusing on intense flavour and clouds at lower wattage with a longer life span.
That makes the S1 the sensible everyday coil for the Mini V2 tank if you aren’t running a big dual-battery mod. It fits the same tank as the A-series coils, but asks roughly half the power of the A1 or A3.
🔌 SMOK TFV Mini V2 S1 0.15 Ohm Single Mesh
✔ Single mesh coil
✔ 0.15Ω resistance
✔ SMOK: 40–80W, best 60–70W
✔ Custom made for Stick-series batteries
✔ SMOK: longer life span
✔ Fits the TFV Mini V2 (TFV8 Baby V2)
Mini V2 S1 vs S2: The Low-Wattage Pair
SMOK designed both S coils for Stick-series batteries. The difference is the build and the draw.
| Coil | Build | SMOK range | Draw |
|---|---|---|---|
| S1 (this page) | Single mesh | 40–80W, best 60–70W | Open |
| S2 | Quadruple coils | 30–70W, best 45–60W | More restricted |
What Does the Mini V2 S1 Fit?
SMOK’s compatibility table lists the Mini V2 series for the TFV Mini V2 tank and for four kits: the Stick V9, Stick V9 Max, R-Kiss and Species. SMOK publishes an identical list for its Baby V2 series, because the TFV Mini V2 is the TFV8 Baby V2 tank under a new name.
For Stick V9 owners the S1 is the natural default. If you move the tank to a bigger mod later, the same tank will run the SMOK TFV Mini V2 A3 or A1 as well.
Will not fit: the original TFV8 Baby, TFV8 Big Baby, TFV8 X-Baby or full-size TFV8. The V8 Baby coils for those tanks are shorter, and V8 Baby coils don’t fit a Mini V2 tank either.
How to Fit and Prime the S1
- Unscrew the empty tank from the device and open the base.
- Remove the old S1 and check the base seal is clean.
- Prime the mesh through the side ports until the cotton looks wet, not dripping.
- Screw in the new S1, rebuild and fill.
- Let it sit for five minutes; start at 45W and climb to 60W.
How Long Does a Mini V2 S1 Coil Last?
SMOK claims a longer life span for the S1, and because it runs at 60–70W instead of 110W+, it genuinely outlasts the A-series coils in our experience. Change it when the flavour dips and turning the power up doesn’t bring it back.
Mini V2 S1 Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Muted at 40W | The bottom of SMOK’s range. Most people prefer 60W. |
| Hot, sharp hit | Above 75W. Come back down to SMOK’s best range. |
| Leaking from the base | Coil not screwed in fully, or the tank’s base seal is dirty. |
| Doesn’t fit | Check the tank: V8 Baby tanks need V8 Baby coils. |
Best E-Liquids for the S1
A 60–70% VG freebase at 3mg or 6mg: a shortfill e-liquid with a nicotine shot, or a higher-VG 10ml e-liquid. Keep nic salts for pod coils.
Buy Mini V2 S1 Coils Near You
Need TFV Mini V2 S1 coils today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. Running a Stick V9? Ask us about the S1 and S2. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
- SMOK TFV Mini V2 S2 Coils
- SMOK TFV Mini V2 A1 Coils
- SMOK V8 Baby Mesh Coils
- Shortfill E-Liquids
- All SMOK Products
Frequently Asked Questions
What wattage for the Mini V2 S1 coil?
SMOK rates it 40–80W, best 60–70W.
Is the S1 good for a Stick V9?
Yes. SMOK designed the S1 and S2 for its Stick-series batteries.
Are Mini V2 S1 and Baby V2 S1 the same?
Yes. Same coil, SMOK renamed the tank.
Reviews
There are no reviews yet.