SKU: N/A Categories: , Tags: , , , Brand:

Geekvape Q Replacement Pods

£8.99

Geekvape Q replacement pods, three per pack, top fill with a built-in mesh coil in 0.6Ω, 0.8Ω or 1.2Ω. Fits the Sonder Q, Sonder Q 2, Aegis Hero Q and Wenax Q series.

Description

Geekvape Q Pods: Top-Fill Mesh Pods for the Whole Q Series

The Geekvape Q pods are GeekVape’s Q Cartridge, the shared pod for its Q series: the Sonder Q, Sonder Q 2, Aegis Hero Q and the Wenax Q family. They come three to a pack with a mesh coil built in, in 0.6Ω, 0.8Ω and 1.2Ω. Ours are the top-fill version: snap off the mouthpiece, fill, snap it back on.

GeekVape says the mesh coil raises cloud volume by 23.7%, and on its upgraded top-fill pods it quotes up to twice the life of the version they replace. Below: what each resistance feels like, every device it fits, filling, and quick fixes.

Geekvape Q replacement pod 0.6 ohm top fill
The Q cartridge in 0.6Ω, top fill, with the colour band that marks its resistance.

🔌 Geekvape Q Replacement Pods

✔ Three pods per pack
✔ Mesh coil built in
✔ 0.6Ω, 0.8Ω and 1.2Ω
✔ Top fill: snap off the mouthpiece
✔ Colour-coded by resistance on the upgraded pods
✔ Fits the Sonder Q, Aegis Hero Q and Wenax Q series

Geekvape Q Pod 0.6 vs 0.8 vs 1.2 Ohm

GeekVape describes each resistance by the draw and throat hit it gives:

Resistance Wattage Draw How GeekVape describes it
0.6Ω 18–25W Restricted DTL A balanced throat hit with moderate clouds
0.8Ω 12–18W Loose MTL A balance between tight and loose
1.2Ω 8–12W MTL A strong throat hit and a tight draw, close to a cigarette
White Vape Co recommends: for 20mg nic salts, the 0.8Ω is the all-rounder and the 1.2Ω gives the most cigarette-like pull for ex-smokers. Choose the 0.6Ω for more vapour, with 10mg salts or a lower-strength freebase.
Geekvape Q pod top fill upgrade with wattage by resistance
GeekVape’s upgrade sheet for the top-fill Q pod, with the wattage for each resistance.

Which Devices Do Geekvape Q Pods Fit?

GeekVape lists the Q cartridge for the Sonder Q, Sonder Q 2, Aegis Hero Q, Wenax Q, Wenax Q Pro, Wenax Q Ultra and Wenax Q 2, and its chart describes the matched kits simply as all Q series.

Of those, the Geekvape Q Sonder Pod Kit is the one we have a page for, and it takes these pods straight out of the pack. GeekVape doesn’t name the newer Sonder Q 3 or the Digi-Q Vista in its Q cartridge listing, so check with us if you own one.

The Geekvape Aegis Hero 5 we stock is not a Q device: GeekVape doesn’t list the Q pod for it, and it takes its own Aegis Hero 5 cartridge.

Will not fit: the Aegis Boost or Aegis Boost Plus, which GeekVape sells their own pods for.

How to Fill a Top-Fill Q Pod

  1. Take the pod out of the device.
  2. Snap off the mouthpiece to open the fill port.
  3. Fill slowly, following the fill guidance on the pod, and stop short of the top.
  4. Snap the mouthpiece back on firmly and wipe the pod.
  5. GeekVape doesn’t give a soak time; we’d leave a new pod a few minutes before the first puff.

How Long Does a Pod Last?

GeekVape’s upgrade sheet says the new top-fill Q pod lasts up to twice as long as the pod it replaced. In real use, the 1.2Ω at 8–12W lasts longest and the 0.6Ω wears fastest, and sweet liquids shorten any of them. Change the pod when the flavour dulls or starts to taste burnt.

Geekvape Q Pod Troubleshooting

Problem Likely cause and fix
Leaking around the mouthpiece It isn’t snapped fully back on. Press it down until it seats.
Gurgling Take the pod out, wrap the mouthpiece in tissue and flick it firmly.
Not much vapour on the 1.2Ω That is the design: a tight MTL pod. Try the 0.8Ω or 0.6Ω for more.
Burnt taste early on The wattage is above the band for that resistance, or a new pod wasn’t given time to soak.
Pod not detected Clean the contacts on the pod and in the device and reseat it.

Best E-Liquids for These Pods

GeekVape’s own guide gives freebase ranges of up to 10mg on the 0.6Ω, up to 12mg on the 0.8Ω and 6–18mg on the 1.2Ω – our 10ml e-liquids cover all of them. For nic salts, use the UK’s 10mg and 20mg strengths; the 0.8Ω and 1.2Ω suit 20mg best, the 0.6Ω 10mg.

Buy Geekvape Q Pods Near You

Need Geekvape Q pods today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. Bring your Q device in if you’re not sure which resistance to try. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.

You May Also Like

Frequently Asked Questions

Which devices do Geekvape Q pods fit?

The Sonder Q, Sonder Q 2, Aegis Hero Q, Wenax Q, Wenax Q Pro, Wenax Q Ultra and Wenax Q 2.

Do Q pods fit the Aegis Hero 5?

GeekVape doesn’t list them for it. The Hero 5 takes its own Aegis Hero 5 cartridge.

Are Geekvape Q pods top fill or side fill?

GeekVape makes both. The pods we sell are the top-fill version.

Which Q pod is best for nic salts?

The 0.8Ω or 1.2Ω with 20mg salts; the 0.6Ω with 10mg.

How many pods are in a pack?

Three.

Additional information

Weight 0.068 kg
Dimensions 2.2 × 11.3 × 6.7 cm
ohm

0.6ohms, 1.2ohms, 0.8ohms

Coil Ohm

0.6 Ohm, 0.8 Ohm, 1.2 Ohm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…