Description
Aspire Gotek Pro Pod Kit: 1500mAh in a Metal-Finish Gotek
The Aspire Gotek Pro takes the draw-activated Gotek idea and dresses it in a metal finish, with an intelligent LED battery indicator and a 1500mAh battery – more than double the Gotek X. Aspire built it for people who vape often and don’t want to think about charging, and its 0.8Ω mesh pod is rated at 13–16W for a smooth mouth-to-lung draw.
There are still no buttons and no menus: fill the side-fill pod, set the bottom airflow and inhale. It takes Aspire Gotek replacement pods in both 0.8Ω and 0.6Ω. Below: Aspire’s specs, which pod suits which liquid, setup, battery, troubleshooting and how it compares with the Gotek X.
🔌 Aspire Gotek Pro at a Glance
✔ 1500mAh built-in battery
✔ Type-C charging at 1A
✔ Draw-activated, no buttons
✔ Constant 3.4V output
✔ Intelligent LED indicator
✔ Clear e-liquid window
✔ Adjustable bottom airflow
✔ 2ml side-fill Gotek pod, 0.8Ω mesh at 13–16W
Aspire Gotek Pro Specifications
Aspire’s published figures for the Gotek Pro:
| Specification | Gotek Pro |
|---|---|
| Battery | 1500mAh built-in |
| Charging | Type-C, 1A |
| Output | Constant 3.4V |
| Activation | Auto-draw |
| Coil | 0.8Ω meshed, non-replaceable, 13–16W |
| Pod | 2ml refillable Gotek pod, side fill |
| Airflow | Adjustable bottom airflow slider |
| Indicator | Intelligent LED indicator |
| Size and weight | 46 x 20.6 x 81mm, 81g |
| Colours | Stainless Steel, Gunmetal, Titanium, Rose Gold |
Which Pods Fit the Aspire Gotek Pro?
Aspire lists the refillable Gotek pod for the Gotek Pro in both of its resistances.
The Gotek Pro runs on Aspire Gotek replacement pods, sold two to a pack with the mesh coil built into each one. Aspire’s chart lists both the 0.8Ω and the 0.6Ω for the Gotek Pro, so you can choose between a tighter draw and a little more vapour without changing device.
Those pods also fit the Aspire Gotek X, Aspire Gotek Nano and Aspire Gotek Pro 2 – though on the Gotek X we stick to the 0.8Ω.
Will not fit: Minican, PIXO, Loomix or Flexus pods, which use different shapes and contacts.
Getting Started with the Gotek Pro
- Charge the Gotek Pro fully over Type-C – the LED shows the battery level.
- Remove the pod, open the side fill plug and fill, leaving a small air gap.
- Close the plug, wipe the pod dry and seat it back in the device.
- Give a new pod about five minutes to soak before your first puff.
- Set the bottom airflow slider – closed down for MTL, opened a touch for a looser draw – then simply inhale.
Gotek Pro Battery and Charging
The 1500mAh battery is the Gotek Pro’s big advantage over the 650mAh Gotek X. Aspire’s constant 3.4V output keeps the vape consistent rather than chasing power, which helps a charge go further, and most of our customers get more than a day from it on nic salts. The intelligent LED indicator tells you when it’s time to plug in, and the Type-C port charges at 1A.
Gotek Pro Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Not firing | Seat the pod firmly and check the charge. If the airflow is wide open the draw can be too light to trigger – close the slider slightly. |
| Draw feels too loose | Close the bottom airflow slider; the Gotek Pro is at its best as a tight MTL device. |
| Burnt or weak flavour | Top up before the liquid window runs low, and change the pod once the taste fades. |
| Liquid on the base | Wipe away condensation, check the fill plug is fully closed and avoid overfilling. |
Gotek Pro vs Gotek X
| Gotek Pro | Gotek X | |
|---|---|---|
| Battery | 1500mAh | 650mAh |
| Output | Constant 3.4V | Constant 3.6V |
| Finish | Metal finish, 81g | Translucent, 52g |
| Battery display | LED indicator | Not listed |
| Pods | 0.8Ω and 0.6Ω Gotek pods | 0.8Ω Gotek pod (our pick) |
Want the newest Gotek? See the Aspire Gotek Pro 2 and our Aspire Gotek Pro 2 review.
Gotek Pro Colours
Four finishes: Stainless Steel, Gunmetal, Titanium and Rose Gold. The colour options above show what’s in stock now.
What’s in the Box
One Gotek Pro, one 0.8Ω meshed Gotek pod, a Type-C cable and a user manual.
Safety Built In
Aspire’s ASP chipset protects against over-long draws, short circuits, overheating, low voltage, over-voltage and over-current – worth knowing if the kit lives in a pocket with your keys.
Best E-Liquids for the Gotek Pro
Use nic salts or 50/50 freebase. 20mg salts on the 0.8Ω suit most ex-smokers; 10mg on the 0.6Ω gives more vapour. Save with the Aspire Gotek Pro bundle deal, which adds spare pods and four nic salts.
Buy the Gotek Pro Near You
Need the Aspire Gotek Pro today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. Compare all four finishes side by side and pick up spare pods. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
- Aspire Gotek Replacement Pods
- Aspire Gotek Pro Bundle Deal
- Aspire Gotek X Pod Kit
- Aspire Gotek Pro 2
- Aspire Gotek Pro 2 Review
Frequently Asked Questions
Is the Aspire Gotek Pro auto-draw?
Yes – there are no buttons; it fires when you inhale.
What pods fit the Gotek Pro?
Refillable Gotek pods in 0.8Ω or 0.6Ω.
How do I know when to charge the Gotek Pro?
The intelligent LED indicator shows the battery level.
Can I change the wattage on the Gotek Pro?
No. It runs at a constant 3.4V; the pod resistance and airflow change the feel.
Gotek Pro or Gotek X?
The Pro has 1500mAh against 650mAh, a metal finish and an LED indicator; both take Gotek pods.
How much does the Gotek Pro hold?
The UK Gotek pod holds 2ml.
Is the Gotek Pro good for beginners?
Very – no buttons or settings, a tight MTL draw and a big battery for its size.
Reviews
There are no reviews yet.