Description
Geekvape Super Mesh X2 Coils for the Shield, Aero and Cerberus Tanks
The Geekvape Super Mesh X2 is one of two Super Mesh coil heads GeekVape makes for its Shield, Aero and Cerberus sub-ohm tanks. In GeekVape’s current range it’s the 0.4Ω coil – KA1 mesh, rated 50–60W – and the X1 is the 0.2Ω.
Our listing has described this pack as a 0.2Ω coil rated 30–90W. That doesn’t match any Super Mesh coil GeekVape makes: the 0.2 is the X1, and no Super Mesh is rated 30–90W. If you need the 0.2, order the Geekvape Super Mesh X1 coil; if the resistance matters to you here, ask us to check the box before you order.
🔌 Geekvape Super Mesh X2 at a Glance
✔ Five coils per pack
✔ KA1 mesh
✔ 0.4Ω, 50–60W (GeekVape)
✔ Direct-to-lung
✔ Shield, Aero and Cerberus tanks
✔ Same fit as the Super Mesh X1
Super Mesh X2 vs X1
Both coils fit the same three tanks. The difference is resistance and power:
| Super Mesh X2 | Super Mesh X1 | |
|---|---|---|
| Resistance | 0.4Ω | 0.2Ω |
| Wattage | 50–60W | 60–70W |
| Wire | KA1 mesh | KA1 mesh |
| Vape | Cooler, lighter on e-liquid | Warmer, more vapour |
Which Tanks Take the Super Mesh X2?
GeekVape lists the X2 for the Shield, Aero and Cerberus tanks, the same as the X1.
The Shield and Aero tanks aren’t in our range at the moment. Cerberus owners can pick up Cerberus glass with their coils.
Will not fit: Z (Zeus) tanks, the Z Fli, the Z Max or the Alpha. Each has its own coil series – for Z tanks see Geekvape Z XM coils.
How to Fit and Prime a Super Mesh X2
- Drain the tank, then unscrew the base from the glass section.
- Swap the coil: out with the old, screw in the new.
- Drip e-liquid into the wicking ports until the cotton looks dark.
- Refill and let it rest five minutes.
How Long Does a Super Mesh X2 Last?
There’s no official figure. At 50–60W the X2 works less hard than the X1, so it usually outlasts it on the same liquid.
Super Mesh X2 Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Box says X1, not X2 | You have the 0.2Ω X1. Run it at 60–70W. |
| Gurgling | Flooded coil; open the airflow and clear it with a few dry pulls. |
| Harsh hit | You’re above 60W, or the coil is worn. |
Best E-Liquids for the Super Mesh X2
A 70/30 or similar high-VG shortfill at 3mg suits it. That’s our advice; GeekVape doesn’t publish any for this coil.
Buy Super Mesh X2 Coils Near You
Need Super Mesh X2 coils today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock GeekVape coils, tanks and kits, and the team can check which resistance suits your device and e-liquid. We can check the resistance on the box for you before you pay. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
Frequently Asked Questions
What resistance is the Geekvape Super Mesh X2?
GeekVape rates the current X2 at 0.4Ω, 50–60W. The 0.2Ω Super Mesh is the X1.
Does the Super Mesh X2 fit the Cerberus tank?
Yes, along with the Shield and Aero.
How many coils are in a pack?
Five.
Reviews
There are no reviews yet.