Description
Eleaf EC-M Coil 0.15 Ohm: Kanthal Mesh for Melo and iJust Tanks
The Eleaf EC-M coil is a 0.15Ω Kanthal mesh head rated at 30–75W, sold in packs of five. Eleaf made it for its Melo and iJust tank series, as a mesh alternative to the standard EC head.
Eleaf says the mesh gives a much larger heating surface than a wire coil, heating more quickly and evenly for better flavour and bigger clouds. Eleaf names the tank series rather than individual models, so we do the same.
🔌 Eleaf EC-M 0.15Ω, 5 pack
✔ Five EC-M heads
✔ 0.15Ω Kanthal mesh
✔ 30–75W
✔ For Eleaf Melo and iJust tanks
✔ Larger heating surface than wire
EC-M Specification
Eleaf’s figures, from its EC-M page and store:
| Detail | EC-M |
|---|---|
| Resistance | 0.15Ω |
| Wattage | 30–75W |
| Element | Kanthal mesh |
| Size | 11mm across, 27mm high, 5.6g |
Which Tanks Take the EC-M?
Eleaf lists the EC-M for its Melo and iJust series atomisers.
In practice that means the EC-family tanks: the Eleaf FAQ lists the iJust 2, iJust 2 Mini, Melo, Melo 2, Melo III and Melo III Mini for EC heads, though that list predates the EC-M. If your tank takes the standard Eleaf EC coils, check with us that it has the power headroom for a 0.15Ω mesh head.
Will not fit: a 20W device such as our Eleaf Mini iStick 20W – well short of the EC-M’s 30W minimum.
How to Fit and Prime an EC-M Coil
- Empty the tank and unscrew the old head.
- Wet the mesh head with a few drops, as Eleaf advises for all its heads.
- Screw it in, fill and wait five minutes.
- Start at 35–40W and increase.
How Long Does an EC-M Coil Last?
Eleaf gives no figure. Low-resistance mesh at 50W+ wears faster than a wire head; change it when the flavour fades.
EC-M Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Spitting | Open the airflow and use a higher-VG liquid. |
| Dry hits | Drop the wattage and avoid max-VG liquid, which Eleaf says can cause burning. |
Best E-Liquids for the EC-M
Use a 3mg shortfill at around 70/30. Nic salts are too strong at this power.
Buy Eleaf EC-M Coils Near You
Need Eleaf EC-M coils today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. We can check your tank takes EC heads. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
Frequently Asked Questions
Is the EC-M the same as the EC?
Same family and fitting, but the EC-M is 0.15Ω mesh and the EC is parallel wire in 0.3Ω or 0.5Ω.
What wattage is the EC-M coil?
30–75W.
Reviews
There are no reviews yet.