Description
Innokin Prism T18 Coils for the Original Endura T18 and T22
Innokin Prism T18 coils are the 1.5Ω horizontal coils for the original Innokin Endura T18 and Endura T22, and their Prism T18 and Prism T22 tanks, five to a pack.
Please check your kit before ordering. Despite the name, these do not fit the Endura T18 2 – that kit, like the T18E and T22E, takes the shorter Innokin T18E coil. Our old description said otherwise; it was wrong, and we’ve corrected it here.
🔌 Innokin Prism T18 Coils at a Glance
✔ Five coils per pack
✔ 1.5Ω Kanthal
✔ Horizontal coil, organic cotton wick
✔ Tight MTL draw, 13–14W
✔ Original Endura T18 and T22
✔ Not for the Endura T18 2
Prism T18 Coil Specifications
Innokin’s figures for the coil and the original T18 tank:
| Detail | Prism T18 coil |
|---|---|
| Resistance | 1.5Ω |
| Power | 13–14W; Innokin optimises the Endura at 14W |
| Wire and wick | Kanthal, 100% organic cotton |
| Draw | Tight mouth to lung |
Which Endura Kits Take Prism T18 Coils?
Innokin’s box lists the Prism T18 and Prism T22 tanks, and UK stockists sell the coil for the original Endura T18 and Endura T22 kits only.
We don’t currently stock the original Endura T18 or T22. If the kit you bought from us is the Innokin Endura T18 2, it needs T18E coils rather than these.
Will not fit: the Endura T18 2, T18E, T18 X, T22E or T22 Pro (UK version), all of which take the T18E coil, or the iClear 30 and 30S. The Prism S and Prism T20 tanks take their own coils too.
How to Change a Prism T18 Coil
- Unscrew the tank from the battery, then unscrew the tank base.
- Swap the old coil for a new one in the base.
- Wet the wick holes and reassemble.
- Fill and wait five minutes before vaping.
How Long Does a Prism T18 Coil Last?
There’s no official figure. At 13–14W a 1.5Ω coil lasts well; sweet liquids are what shorten it most.
Prism T18 Coil Troubleshooting
| Problem | Likely cause and fix |
|---|---|
| Coil too long for my tank | Your tank is a T18E or T18 II. Order T18E coils instead. |
| Burnt taste | Not primed long enough, or the tank ran low. Keep it topped up. |
| Leaking | Check the coil is screwed fully into the base. |
How to Tell Which Endura Tank You Have
Innokin prints the tank’s name on the metal sleeve. PRISM T18E or T18 II on the sleeve means you need the T18E coil; plain PRISM T18 or T22 means this one.
Best E-Liquids for Prism T18 Coils
A tight MTL coil like this suits 50/50 freebase e-liquids or 10mg to 20mg nic salts. Avoid thick high-VG liquid.
Buy Prism T18 Coils Near You
Need Prism T18 coils today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock Innokin coils, tanks and kits, and the team can check which resistance suits your device and e-liquid. Bring your tank in so we can check whether it’s a T18 or a T18 II. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.
You May Also Like
Frequently Asked Questions
Do Prism T18 coils fit the Endura T18 2?
No. The Endura T18 2 takes the shorter T18E coil.
Do Prism T18 coils fit the Endura T22?
Yes – the original Endura T22 and its Prism T22 tank.
How many coils are in a pack?
Five.
Reviews
There are no reviews yet.