GTIN: 852401007221 SKU: N/A Categories: , Tags: , , , Brand:

Kangertech Dual Coil Units – 5 Pack

£9.99

Kangertech dual coil heads, 5 pack, 1.8Ω or 1.5Ω. Two coils in one head for the Kanger Protank 3, Mini Protank 3 and Aerotank.

Description

Kangertech Dual Coil Units: Replacement Heads for Protank 3 and Aerotank

These Kangertech dual coil units are the classic two-coil heads for Kanger’s Protank 3, Mini Protank 3 and Aerotank, sold in packs of five. Kanger called them its upgraded dual coil: two coils in one head, with a stainless steel wrap.

Kanger no longer makes or lists these coils, so we’ve limited this page to what Kanger’s own archived pages confirm, and said clearly where a claim comes only from retailers.

🔌 Kangertech Dual Coil Units, 5 pack

✔ Five dual coil heads
✔ 1.8Ω (Kanger-confirmed) and 1.5Ω
✔ Two coils in one head
✔ Stainless steel wrap
✔ For Protank 3, Mini Protank 3 and Aerotank

Kangertech Dual Coil Resistances

Kanger’s archived Aerotank page lists the dual coil in 1.2Ω and 1.8Ω, with the 1.8Ω made of two 3.6Ω coils. We stock the 1.8Ω and 1.5Ω.

Resistance Source Wattage
1.8Ω Kanger (two 3.6Ω coils) Not published by Kanger
1.5Ω Retailer listings only Not published
White Vape Co recommends: these are mouth-to-lung heads from the pre-sub-ohm era. Run them gently – around 8–12W on a variable-wattage device – and increase only if the vapour is thin.

Which Tanks Take Kangertech Dual Coils?

Kanger’s archived pages confirm the Aerotank and Aerotank 2, the Protank 3 and the Mini Protank 3, whose heads Kanger says are interchangeable with the Protank 3 and Aerotank.

All of these are discontinued, and we don’t sell a tank that takes these heads. UK retailers also list the Evod 2, Evod Glass, Evod Mega and Genitank, but Kanger’s own pages don’t, so we can’t promise those. Match the new head to your old one before you buy.

How to Fit and Prime a Kanger Dual Coil

  1. Empty the tank and unscrew the old head from the base.
  2. Drip a few drops of liquid into the head’s top and wicking holes.
  3. Screw in the new head, reassemble and fill.
  4. Wait five minutes before your first puff.

How Long Does a Kanger Dual Coil Last?

Kanger never published a figure. At low power, a week or two is typical; replace it when the taste fades.

Dual Coil Troubleshooting

Problem Likely cause and fix
Weak vapour Raise the power a little, or check that the head is screwed fully in.
Burnt taste Not primed, or too much power for a 1.8Ω head.

Best E-Liquids for Kanger Dual Coils

Kanger didn’t give guidance. At 1.5Ω–1.8Ω these suit 50/50 freebase from our 10ml e-liquids or nic salts at 10mg or 20mg.

Buy Kangertech Dual Coils Near You

Need Kangertech dual coils today? Our Totton vape shop, Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-liquid. Bring your old head and we’ll match it. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options.

You May Also Like

Frequently Asked Questions

Do these fit the Kanger Evod 2?

Retailers say so, but Kanger’s own pages don’t confirm it. Bring your tank in and we’ll check.

Is Kangertech still making dual coils?

No. Kanger’s current site lists no coils. Some stock remains in retail.

Is the 1.5 ohm Kanger dual coil genuine?

Kanger’s own pages list the dual coil in 1.2Ω and 1.8Ω; the 1.5Ω appears only on retailer listings.

Specifications

Weight 0.068 kg
ohm

1.8ohms, 1.5

Coil Ohm

1.5 Ohm, 1.8 Ohm

Reviews are from customers who bought the product from us. Vape Club members receive loyalty points for leaving a review, whether it is positive or negative. We do not remove reviews for being negative.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.